Atari 810
Dan Tobias (Talk | contribs) (→Links) |
Dan Tobias (Talk | contribs) (→Links) |
||
| (4 intermediate revisions by one user not shown) | |||
| Line 3: | Line 3: | ||
|subcat=Floppy disk | |subcat=Floppy disk | ||
}} | }} | ||
| − | |||
The '''Atari 810''' was a [[floppy disk]] drive for the Atari 400 and 800 computers, using a 5 1/4" single-density soft-sector disk format consisting of 720 sectors (numbered from 1 to 720 decimal, or 1 to 2D0 hex) each containing 128 bytes (numbered from 0 to 127 decimal, or 0 to 7F hex). This resulted in a total capacity of 90 kilobytes. The sectors were arranged in 40 tracks of 18 sectors each. Data was stored with [[FM encoding]]. | The '''Atari 810''' was a [[floppy disk]] drive for the Atari 400 and 800 computers, using a 5 1/4" single-density soft-sector disk format consisting of 720 sectors (numbered from 1 to 720 decimal, or 1 to 2D0 hex) each containing 128 bytes (numbered from 0 to 127 decimal, or 0 to 7F hex). This resulted in a total capacity of 90 kilobytes. The sectors were arranged in 40 tracks of 18 sectors each. Data was stored with [[FM encoding]]. | ||
| Line 9: | Line 8: | ||
The FORMAT command on the Atari prepares a disk for use by writing all-zero values for each of its sectors. | The FORMAT command on the Atari prepares a disk for use by writing all-zero values for each of its sectors. | ||
| + | |||
| + | == See also == | ||
| + | * [[Atari File Management Subsystem]] (filesystem) | ||
| + | * [[ATR]] (disk image file) | ||
== Links == | == Links == | ||
| Line 14: | Line 17: | ||
* [http://archive.org/details/Diskey_1982_Adventure_International Manual for Diskey, an Atari disk utility] | * [http://archive.org/details/Diskey_1982_Adventure_International Manual for Diskey, an Atari disk utility] | ||
* [http://web.archive.org/web/20120316190222/http://rossum.posterous.com/a-little-atari-810-disk-drive A little Atari 810 disk drive] | * [http://web.archive.org/web/20120316190222/http://rossum.posterous.com/a-little-atari-810-disk-drive A little Atari 810 disk drive] | ||
| + | * [http://www.atarimax.com/ape/docs/DiskImageFAQ/ Atari Disk Image FAQ] | ||
| + | * [https://archive.org/details/atari815manual/mode/2up Atari 815 manual] (dual drive produced only in prototypes) | ||
[[Category:Atari computers]] | [[Category:Atari computers]] | ||
Latest revision as of 14:24, 3 March 2020
The Atari 810 was a floppy disk drive for the Atari 400 and 800 computers, using a 5 1/4" single-density soft-sector disk format consisting of 720 sectors (numbered from 1 to 720 decimal, or 1 to 2D0 hex) each containing 128 bytes (numbered from 0 to 127 decimal, or 0 to 7F hex). This resulted in a total capacity of 90 kilobytes. The sectors were arranged in 40 tracks of 18 sectors each. Data was stored with FM encoding.
The contents of the disk were organized using the Atari File Management Subsystem (FMS) as the filesystem. This allocated sector 360 (168 hex) for the VTOC (Volume Table of Contents) and sectors 361-368 (169-170 hex) for the directory. Sector 720 (2D0 hex) was unused (due to it not being addressable by the file system because of a conflict in its zero-based numbering from 0 to 719 being unable to address it, while it can address a nonexistent zero sector), and bootable disks had the boot record in sector 1 (followed by a DOS.SYS file in the next few sectors), leaving the remaining sectors free for user files.
The FORMAT command on the Atari prepares a disk for use by writing all-zero values for each of its sectors.
[edit] See also
- Atari File Management Subsystem (filesystem)
- ATR (disk image file)
[edit] Links
- Technical manual with lots of Atari info
- Manual for Diskey, an Atari disk utility
- A little Atari 810 disk drive
- Atari Disk Image FAQ
- Atari 815 manual (dual drive produced only in prototypes)
