Kitchen Aid stove fault codes
From Just Solve the File Format Problem
2 digit codes
| Fault code
|
Description
|
| F0
|
Board failure
|
| F1
|
Board failure
|
| F2
|
Oven temperature is too high
|
| F3
|
Oven temperature sensor (RTD) open
|
| F4
|
Oven temperature sensor (RTD) shorted
|
| F5
|
Board failure
|
| F7
|
Function key stuck on ERC
|
| F8
|
Board failure
|
| F9
|
Oven door lock failure
|
4 digit codes
| Fault code
|
Description
|
| F1-E0
|
EEPROM communication error
|
| F1-E1
|
EEPROM checksum error
|
| F1-E2
|
UL A/D error(s)
|
| F1-E3
|
Wiring harness cavity size does not match previously stored value
|
| F1-E4
|
Model ID error
|
| F1-E5
|
Calibration shifted
|
| F1-E6
|
Latch signal mismatch error
|
| F1-E9
|
Stack overflow
|
| F2-E0
|
Shorted keypad (also called touch pad)
|
| F2-E1
|
Keypad cable unplugged
|
| F2-E5
|
Cancel key drive line open
|
| F2-E6
|
Cancel key drive line open
|
| F3-E0
|
Oven temperature sensor (RTD) opened (upper oven, if double oven)
|
| F3-E1
|
Oven temperature sensor (RTD) shorted (upper oven, if double oven)
|
| F3-E2
|
Oven temperature is too high (Cook mode)
|
| F3-E3
|
Oven temperature is too high (Clean mode)
|
| F3-E4
|
Oven temperature sensor (RTD) opened (lower oven, if double oven)
|
| F3-E5
|
Oven temperature sensor (RTD) shorted (lower oven, if double oven)
|
| F3-E6
|
Warming drawer sensor open
|
| F3-E7
|
Warming drawer sensor shorted
|
| F4-E1
|
Meat probe malfunction - shorted
|
| F5-E0
|
Door switches do not agree (condition exists when door switch is closed indicating an open door, and latch switch is closed indicating a locked door)
|
| F5-E1
|
Self clean latch will not lock
|
| F5-E2
|
Latch during CLEAN error
|
| F5-E5
|
Self clean temperature not reached within 45 minutes.
|
| F5-E6
|
Door is open, but latch is locked
|
| F5-E7
|
Self clean latch will not unlock
|
| F6-E0
|
Return line not connected
|
| F7-E1
|
Common switch wire is defective
|
Reference
