Thermador stove fault codes
From Just Solve the File Format Problem
Revision as of 05:47, 21 April 2015 by VolodyA! V Anarhist (Talk | contribs)
| Fault Code | Description |
|---|---|
| E1 | Control board problem. |
| E2 | Check oven sensor (RTD). |
| E3 | Open sensor. Replace oven temperature sensor (RTD). |
| E4 | Shorted sensor. Replace oven temperature sensor (RTD). |
| E5, E6, E7, E8 | Control board problem. |
| E9 | Latch switch problem. |
| E10 | Control board problem. |
| E11, E12 | Latch switch problem. |
| E13 | CT models: Check power to latch motor. CMT models: control board not converted. |
| E14 | Latch switch problem. |
| E15 | Control board problem. |
| F0 | Electronic oven control failure |
| F1 | Electronic oven control failure |
| F2 | Oven temperature too hot |
| F3 | Open oven temperature sensor (RTD) |
| F4 | Shorted oven temperature sensor (RTD) |
| F7 | Function key stuck |
| F8 | Internal logic failure |
| F9 | Internal logic failure |
| Fd | Bake and Broil relay drives act simultaneously. |
