Kitchen Aid front loading automatic washer fault codes
From Just Solve the File Format Problem
Revision as of 04:57, 21 April 2015 by VolodyA! V Anarhist (Talk | contribs)
Model KHWS01PMT/ WH
Fault code | Description |
---|---|
FH | No water detected entering machine or pressure switch trip not detected |
F02 | Long drain |
F05 | Water temperature sensor error |
F06 | Drive motor tachometer error |
F07 | Motor control unit error |
F09 | Overflow condition |
F10 | Motor control unit (MCU) heat sink thermal trip |
F11 | Serial communication error |
F13 | Dispenser circuit error |
F14 | EEPROM error |
F15 | Motor control unit (MCU) error |
F21 or F22 | CCU / Touchpad / LED assembly error |
FdU | Door unlock error |
FdL | Door lock error |
Sud | Suds lock (Overdose of detergent detected during the wash cycle) |
Model KHWV01RSS
Fault code | Description |
---|---|
FH | No water detected entering machine or pressure switch trip not detected |
F02 | Long drain |
F05 | Water temperature sensor error |
F06 | Drive motor tachometer error |
F07 | Motor control unit error |
F09 | Overflow condition |
F10 | Motor control unit (MCU) heat sink thermal trip |
F11 | Serial communication error |
F13 | Dispenser circuit error |
F14 | EEPROM error |
F15 | Motor control unit (MCU) error |
F21 or F22 | CCU / Touchpad / LED assembly error |
F32 | Pressure switch failure |
F33 | System leak |
FdU | Door unlock error |
FdL | Door lock error |
Sud | Suds lock (Overdose of detergent detected during the wash cycle) |