UTF-16
m |
(→Byte-oriented encodings) |
||
| Line 19: | Line 19: | ||
There are two byte-oriented flavors of UTF-16: UTF-16BE (big-[[Endianness|endian]]) and UTF-16LE (little-endian). Each code unit uses 2 bytes, so each code ''point'' is encoded using either 2 or 4 bytes. | There are two byte-oriented flavors of UTF-16: UTF-16BE (big-[[Endianness|endian]]) and UTF-16LE (little-endian). Each code unit uses 2 bytes, so each code ''point'' is encoded using either 2 or 4 bytes. | ||
| − | The code units are encoded according to the desired byte order, and the order of the code units is not changed. | + | The code units are encoded according to the desired byte order, and the order of the code units is not changed. This means that for UTF-16LE, 4-byte code points use sort of a ''mixed-endian'' byte order. |
| − | Files encoded in UTF- | + | Files encoded in UTF-16 often begin with a [[Byte Order Mark]] (BOM) to indicate their byte order, and to help distinguish them from other character encodings. But we need to be careful with terminology here, because the Unicode standard has decreed<ref>[http://www.unicode.org/versions/Unicode6.2.0/ch02.pdf Unicode 6.2, §2.6]</ref> that the term "UTF-16BE" does ''not'' mean the same thing as "UTF-16 with big-endian byte order" (and similarly for UTF-16LE). A file encoded in "UTF-16" may use a BOM, but a file labeled as "UTF-16BE" or "UTF-16LE" should not use a BOM. |
== Relationship with UCS-2 == | == Relationship with UCS-2 == | ||
Revision as of 23:44, 24 September 2013
UCS Transformation Format—16-bit (UTF-16) is a 16-bit Unicode character encoding. It encodes a sequence of Unicode code points in a sequence of unsigned 16-bit integers (which we'll call code units).
Code points up to U+FFFF use one code unit, while higher code points use two. UTF-16 is not capable of encoding code points in the reserved range U+D800 to U+DFFF, but that range is not required for full Unicode support.
Contents |
Format
For code points up to U+FFFF, the encoding is done in the trivial way (U+0000=0x0000, U+0001=0x0001, ..., U+FFFF=0xffff).
For higher code points, first subtract 0x10000 to get a 20-bit number. Add the 10 most significant bits of that number to 0xd800, and use that as the first code unit. Add the 10 least significant bits to 0xdc00, and use that as the second code unit.
Descriptions of UTF-16 often use the term surrogate pair. This tends to create unnecessary confusion, perhaps because whether a surrogate pair is one code point or two depends on context in subtle ways. See UCS-2 for the historical reasons that this term exists.
Byte-oriented encodings
There are two byte-oriented flavors of UTF-16: UTF-16BE (big-endian) and UTF-16LE (little-endian). Each code unit uses 2 bytes, so each code point is encoded using either 2 or 4 bytes.
The code units are encoded according to the desired byte order, and the order of the code units is not changed. This means that for UTF-16LE, 4-byte code points use sort of a mixed-endian byte order.
Files encoded in UTF-16 often begin with a Byte Order Mark (BOM) to indicate their byte order, and to help distinguish them from other character encodings. But we need to be careful with terminology here, because the Unicode standard has decreed[1] that the term "UTF-16BE" does not mean the same thing as "UTF-16 with big-endian byte order" (and similarly for UTF-16LE). A file encoded in "UTF-16" may use a BOM, but a file labeled as "UTF-16BE" or "UTF-16LE" should not use a BOM.
Relationship with UCS-2
UTF-16 is compatible with UCS-2, in the sense that a UTF-16 decoder can correctly decode UCS-2, provided that the UCS-2 data does not use any reserved Unicode code points. The reverse is not true: a UCS-2 decoder cannot correctly decode UTF-16.
Specifications
- RFC 2781 (2000-02)
- Unicode 6.0, Chapter 3 (2011) — §3.9 D91; §3.10 D96–D98, Table 3-9
- ISO/IEC 10646:2003 Annex Q (2003)
