Color format
m |
|||
| Line 44: | Line 44: | ||
By comparison, the '''A8B8G8R8''' is similar to above, with an additional 8-bits for alpha information — totalling 32-bits per pixel. Whether the alpha is expected to be ''premultiplied'' or ''straight'' is determined by the hardware. | By comparison, the '''A8B8G8R8''' is similar to above, with an additional 8-bits for alpha information — totalling 32-bits per pixel. Whether the alpha is expected to be ''premultiplied'' or ''straight'' is determined by the hardware. | ||
| + | |||
| + | == R5G6B5 == | ||
| + | |||
| + | '''R5G6B5''' was a common format for early 3D game consoles. Which allowed 5-bits for ''red'' and ''blue'', and 6-bits for ''green''. The additional ''green'' bits were owed to the human eye's higher-sensitivity to green light. | ||
== See also == | == See also == | ||
Revision as of 17:37, 25 August 2023
A color format, not to be confused with Color profiles or Graphics formats, describe the way in which data is stored within an image and specifically concerns the way that data is loaded by dedicated graphics hardware. The concept of a color format has an inconsistent nomenclature, often referred to as Pixel, Texture, Image, or Graphics formats. In Direct3D, these are known as Surface Formats.
Often, dedicated graphics hardware has a fixed range of supported color formats, chosen to meet both industry needs of those which integrate with the hardware and whatever will offer the best performance or stability on said hardware.
A color format is broken down into the number of bits reserved for each color, and the order of those bits, i.e. R8G8B8. As color formats concern graphics hardware, they often specify the red, blue, green and alpha channels. Although, some formats exist for other graphics purposes, such as normal maps or depth maps.
The more bits which are allocated, the more potential colors can be reproduced with that format. However, this comes at the cost of size. As humans are more sensitive to changes in luminance than colour, and more sensitive to certain wave-lengths of light, some formats specifically under-allocate bits to certain channels as a compromise between visual fidelity and size.
Whilst there is no standardisation of the letters when describing a format, the following are commonly used:
| Letter | Purpose |
|---|---|
| R | Red |
| G | Green (or Grey) |
| B | Blue |
| A | Alpha |
| L | Luminance |
| U, V, W & Q | Bump or normal data |
| P | Palette index (i.e. a P8 denotes a palette of 256 colors) |
| X | Padding bits (ignored but kept for alignment) |
Example
The most simplest color format is R8G8B8, signifying that 8-bits (a byte) are reserved for the red, blue, green channels, respectively. Totalling 24-bits per pixel. This allows each channel to range between 0-255 values, for a total of over 16 million potential colours.
By comparison, the A8B8G8R8 is similar to above, with an additional 8-bits for alpha information — totalling 32-bits per pixel. Whether the alpha is expected to be premultiplied or straight is determined by the hardware.
R5G6B5
R5G6B5 was a common format for early 3D game consoles. Which allowed 5-bits for red and blue, and 6-bits for green. The additional green bits were owed to the human eye's higher-sensitivity to green light.
See also
- Image formats on the OpenGL wiki
- GPU Texture formats on the SwitchBrew wiki
- Direct3D Surfaces and Surface Format documentation.
≈
