Parity Volume Set
| Line 1: | Line 1: | ||
{{FormatInfo | {{FormatInfo | ||
|formattype=electronic | |formattype=electronic | ||
| − | | | + | |subcat=Error detection and correction |
|extensions={{ext|par}}, {{ext|pxx}}, {{ext|par2}}, {{ext|pa3}} | |extensions={{ext|par}}, {{ext|pxx}}, {{ext|par2}}, {{ext|pa3}} | ||
}} | }} | ||
Revision as of 14:37, 21 September 2019
Parity Volume Set (also known as parity archive or parchive) is a file format for storing redundant data for one or more input files. These data can be used to repair the input files if they get damaged. The error correction is based on the Reed-Solomon algorithm. Three versions of the format exist: Par1, Par2 and Par3. The Par3 format never made it beyond the proposal stage, but it is used by the MultiPar tool.
Contents |
Identification
A Par1 file starts with the following byte sequence:
50 41 52 00 00 00 00 00
This corresponds to the ASCII text string PAR, followed by 5 null bytes.
A Par2 file starts with the bytes:
50 41 52 32 00 50 4B 54
This corresponds to ASCII text string PAR2, followed by a null byte and the text string PKT.
Finally, a Par3 file can be identified by the following 4-byte sequence:
50 41 33 00
This corresponds to the text string PA3, followed by a null byte.
Specifications
- Parity Volume Set Specification v1.0
- Parity Volume Set Specification 2.0
- proposal for Parchive Specification 3.0
Software
- par2cmdline (Linux par2 tool)
- MultiPar (Windows, GUI)
