TI-59 magnetic card
Dan Tobias (Talk | contribs) (→Character/Key Codes) |
Dan Tobias (Talk | contribs) m |
||
Line 9: | Line 9: | ||
If you ran out of magnetic cards for it, it was apparently possible to make new ones by [http://fixunix.com/handheld/100248-ti-59-magnetic-cards.html cutting up floppy disks]. | If you ran out of magnetic cards for it, it was apparently possible to make new ones by [http://fixunix.com/handheld/100248-ti-59-magnetic-cards.html cutting up floppy disks]. | ||
− | The card reader used a four-track head designed to function at a speed between 2.0 and 2.5 inches per second. Track one is closest to the edge of the card. The write signal is a square wave of | + | The card reader used a four-track head designed to function at a speed between 2.0 and 2.5 inches per second. Track one is closest to the edge of the card. The write signal is a square wave of ± 1.5 V. |
The TI-59 also had a place to insert firmware chips which contained library routines which could be used in programs. | The TI-59 also had a place to insert firmware chips which contained library routines which could be used in programs. |
Revision as of 23:02, 7 December 2012
The TI-59 was a programmable calculator from Texas Instruments which was available from 1977 through 1983. It supported the ability to load and save programs using a magnetic-stripe card reader. The TI-58 model was also available at the same time with similar programming features but no card reader.
If you ran out of magnetic cards for it, it was apparently possible to make new ones by cutting up floppy disks.
The card reader used a four-track head designed to function at a speed between 2.0 and 2.5 inches per second. Track one is closest to the edge of the card. The write signal is a square wave of ± 1.5 V.
The TI-59 also had a place to insert firmware chips which contained library routines which could be used in programs.
Character/Key Codes
Each key, character, or function on the calculator corresponded to a numeric code of two decimal digits. (How, exactly, this translated into particular magnetic pulses on the card is uncertain.)
Code | Key | Description |
---|---|---|
00 | 0 | Number keys |
01 | 1 | |
02 | 2 | |
03 | 3 | |
04 | 4 | |
05 | 5 | |
06 | 6 | |
07 | 7 | |
08 | 8 | |
09 | 9 | |
10 | E' | Function keys |
11 | A | |
12 | B | |
13 | C | |
14 | D | |
15 | E | |
16 | A' | |
17 | B' | |
18 | C' | |
19 | D' | |
20 | 2nd CLR | Clear All |
21 | 2nd | Shift to alternate function |
22 | INV | Inverse |
23 | LNx | |
24 | CE | Clear entry |
25 | CLR | Clear |
26 | 2ND | |
27 | INV | Inverse function |
28 | LOG | |
29 | CP | Clear Program |
30 | TAN | Tangent |
31 | LRN | Learn |
32 | X:T | |
33 | X^{2} | |
34 | √X | |
35 | 1/X | |
36 | PGM | Program (followed by 2-digit number of library program) |
37 | P/R | Polar/Rectangular |
38 | SIN | |
39 | COS | |
40 | IND | |
41 | SST | |
42 | STO | Memory store (followed by 2-digit memory location) |
43 | RCL | Memory recall (followed by 2-digit memory location) |
44 | SUM | |
45 | Y^{X} | |
46 | INS | Insert program line |
47 | CMS | |
48 | EXC | |
49 | PRD | |
50 | |x| | Absolute value |
51 | BST | |
52 | EE | Enter exponent |
53 | ( | |
54 | ) | |
55 | ÷ | |
56 | DEL | Delete program line |
57 | ENG | Engineering notation |
58 | FIX | Fix decimal |
59 | INT | Integer |
60 | DEG | Degrees |
61 | GTO | Goto |
62 | PG* | |
63 | EX* | |
64 | PD* | |
65 | × | |
66 | PAU | Pause |
67 | X=T | |
68 | NOP | No-Op |
69 | OP | |
70 | RAD | Radians |
71 | SBR | Subroutine |
72 | ST* | |
73 | RC* | |
74 | SM* | |
75 | - | |
76 | LBL | Label |
77 | X≧T | |
78 | ∑+ | |
79 | X-bar | |
80 | GRD | |
81 | RST | |
82 | HIR | |
83 | GO* | |
84 | OP* | |
85 | + | |
86 | STF | |
87 | IFF | |
88 | DMS | |
89 | π | |
90 | LST | |
91 | R/S | Run/Stop |
92 | RTN | Return from subroutine |
93 | . | |
94 | +/- | |
95 | = | |
96 | WRT | |
97 | DSZ | Decrement and skip at zero |
98 | ADV | |
99 | PRT |