Oracle database error messages/9

From Just Solve the File Format Problem
Revision as of 19:35, 7 November 2015 by Jsummers (Talk | contribs)

Jump to: navigation, search
File Format
Name Oracle database error messages
Ontology

Please see Oracle database error message

Code Message
RMAN-05045 Performing import of metadata...
RMAN-05046 Export completed
RMAN-05047 Import completed
RMAN-05048 specified file name string conflicts with a file used by the target database
RMAN-05049 datafile string is an Oracle Managed File, DB_CREATE_FILE_DEST not set at target
RMAN-05050 flashing back control file to SCN string
RMAN-05051 analyzing automatic repair options; this may take some time
RMAN-05052 Repair string is not compatible with this version of RMAN.
RMAN-05053 AUXILIARY DESTINATION is only valid when using a RMAN-managed auxiliary instance
RMAN-05054 recover block operand string cannot be used to recover datafile
RMAN-05055 recover datafile operand string cannot be used to recover block
RMAN-05060 block specifier must be specified to recover block
RMAN-05061 analyzing automatic repair options complete
RMAN-05062 image copy needs no roll forward
RMAN-05070 Running TRANSPORT_SET_CHECK on recovery set tablespaces
RMAN-05071 TRANSPORT_SET_CHECK completed successfully
RMAN-05072 TRANSPORT_SET_CHECK failed
RMAN-05073 Tablespace string creation SCN string is ahead of point-in-time SCN string
RMAN-05074 Tablespace string does not exist at specified point-in-time SCN string
RMAN-05115 Cross-platform INSTANT RESTORE is not supported.
RMAN-05116 feature was not enabled: string
RMAN-05500 the auxiliary database must be not mounted when issuing a DUPLICATE command
RMAN-05501 aborting duplication of target database
RMAN-05502 the target database must be mounted when issuing a DUPLICATE command
RMAN-05503 at least one auxiliary channel must be allocated to execute this command
RMAN-05504 at least two redo log files or groups must be specified for this command
RMAN-05505 auxiliary file name conversion of 'string' exceeds maximum length of string
RMAN-05506 error during recursive execution
RMAN-05507 standby control file checkpoint (string) is more recent than duplication point-in-time (string)
RMAN-05510 Duplicate finished
RMAN-05511 Datafile string skipped by request
RMAN-05512 Tablespace string cannot be skipped from duplication
RMAN-05513 cannot duplicate, control file is not current or standby
RMAN-05514 Tablespace string has undo information, cannot skip
RMAN-05515 Duplicate for standby does not allow the use of SET UNTIL
RMAN-05516 duplicate operand specified: string
RMAN-05517 tempfile string conflicts with file used by target database
RMAN-05518 Automatically adding tablespace string
RMAN-05519 WARNING: tablespace string is always included when duplicating
RMAN-05520 database name mismatch, auxiliary instance has string, command specified string
RMAN-05521 DUPLICATE without CATALOG and TARGET not open requires that UNDO TABLESPACE is specified
RMAN-05522 Skipping tablespace string
RMAN-05523 Tablespace string is read only and SKIP READONLY was specified
RMAN-05524 Tablespace string is offline
RMAN-05525 SKIP TABLESPACE cannot be used when using DUPLICATE TABLESPACE
RMAN-05526 datafile number not processed because file is OFFLINE IMMEDIATE
RMAN-05527 Tablespace string has one or more OFFLINE IMMEDIATE datafiles
RMAN-05528 datafile number not processed because file belongs to tablespace with one or more offline immediate datafile (string)
RMAN-05529 WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to disk group only.
RMAN-05530 an UNTIL TIME or SCN cannot be specified with FROM ACTIVE DATABASE
RMAN-05531 a mounted database cannot be duplicated while datafiles are fuzzy
RMAN-05532 PASSWORD FILE specified without FROM ACTIVE DATABASE
RMAN-05533 string is not supported on string database
RMAN-05534 WARNING: LOG_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to disk group only.
RMAN-05535 WARNING: All redo log files were not defined properly.
RMAN-05536 auxiliary logfile name string conflicts with a file used by the target database
RMAN-05537 DUPLICATE without TARGET connection when auxiliary instance is started with spfile cannot use SPFILE clause
RMAN-05538 WARNING: implicitly using DB_FILE_NAME_CONVERT
RMAN-05539 DUPLICATE TARGET DATABASE cannot be used without connecting to the TARGET
RMAN-05540 no archived logs found in repository for database string
RMAN-05541 no archived logs found in target database
RMAN-05542 Only UNTIL TIME can be used with DUPLICATE without TARGET and CATALOG connections
RMAN-05543 DUPLICATE without TARGET connection requires that DATABASE is specified
RMAN-05544 Cannot specify ACTIVE DATABASE when not connected to target database
RMAN-05545 WARNING: Until SCN string is ahead of SCN of last full resync of recovery catalog: string
RMAN-05546 DUPLICATE without TARGET and CATALOG connections requires that BACKUP LOCATION is specified
RMAN-05547 Checking that duplicated tablespaces are self-contained
RMAN-05548 The set of duplicated tablespaces is not self-contained
RMAN-05549 The following SYS objects were found in skipped tablespaces
RMAN-05550 TARGET database not open, cannot verify that set of tablespaces being duplicated does not have SYS objects
RMAN-05551 Not connected to TARGET, cannot verify that set of tablespaces being duplicated does not have SYS objects
RMAN-05552 Object string on tablespace string
RMAN-05553 SYS objects in skipped tablespaces prevent duplication
RMAN-05554 cannot specify INCARNATION when duplicating without TARGET and CATALOG connections
RMAN-05555 Not connected to TARGET or TARGET not open, cannot verify that subset of tablespaces is self-contained
RMAN-05556 not all datafiles have backups that can be recovered to SCN string
RMAN-05557 Target instance not started with server parameter file
RMAN-05558 Must specify DB_UNIQUE_NAME with FOR STANDBY clause
RMAN-05559 error converting parameter string, string larger than number
RMAN-05560 Using previous duplicated file string for datafile number with checkpoint SCN of string
RMAN-05561 CATALOG did not return information about tablespaces with undo segments
RMAN-05562 SPFILE backup not found for database string with DBID number created before string in string
RMAN-05563 SPFILE backup not found for database with DBID number created before string in string
RMAN-05564 SPFILE backup not found for database string created before string in string
RMAN-05565 SPFILE backup created before string not found in string
RMAN-05566 SPFILE backup not found for database string with DBID number in string
RMAN-05567 SPFILE backup not found for database with DBID number in string
RMAN-05568 SPFILE backup not found for database string in string
RMAN-05569 SPFILE backup not found in string
RMAN-05570 Duplicate for standby does not allow the use of LOGFILE
RMAN-05571 DORECOVER specified for non standby duplication
RMAN-05572 Controlfile backup not found for database string with DBID number created before string in string
RMAN-05573 CONTROLFILE backup not found for database with DBID number created before string in string
RMAN-05574 CONTROLFILE backup not found for database string created before string in string
RMAN-05575 CONTROLFILE backup created before string not found in string
RMAN-05576 CONTROLFILE backup not found for database string with DBID number in string
RMAN-05577 CONTROLFILE backup not found for database with DBID number in string
RMAN-05578 CONTROLFILE backup not found for database string in string
RMAN-05579 CONTROLFILE backup not found in string
RMAN-05580 Duplicate for standby does not allow the use of SKIP READONLY
RMAN-05581 Duplicate for standby does not allow the use of SKIP TABLESPACE
RMAN-05582 Duplicate for standby does not allow the use of OPEN RESTRICTED
RMAN-05583 Duplicate for standby does not allow the use of TABLESPACE
RMAN-05584 Duplicate for standby does not allow the use of NOREDO
RMAN-05585 Duplicate for standby does not allow the use of UNDO TABLESPACE
RMAN-05586 The following materialized objects were found in skipped tablespaces
RMAN-05587 Materialized table string on tablespace string
RMAN-05588 Materialized index string on tablespace string
RMAN-05589 Materialized objects in skipped tablespaces prevent duplication
RMAN-05590 Reenabling controlfile options for auxiliary database
RMAN-05591 Ignoring error, reattempt command after duplicate finishes
RMAN-05592 Dropping offline and skipped tablespaces
RMAN-05593 Could not drop tablespace string due to constraints, will reattempt removal after other tablespaces are removed
RMAN-05594 Could not drop tablespace string due to constraints
RMAN-05595 Leaving database unopened, as requested
RMAN-05596 Error while removing created server parameter file
RMAN-05597 Database started with server parameter file and PFILE clause used in command
RMAN-05598 SPFILE and PFILE clause specified in command
RMAN-05599 PASSWORD clause is not needed when duplicating for standby database from active database
RMAN-05600 Cannot specify UNTIL clause when duplicating from active database
RMAN-05601 Failed to restore original settings to server parameter file
RMAN-05602 restarting auxiliary database without server parameter file
RMAN-05621 password file location could not be found for the target database
RMAN-05622 password file location could not be found for the auxiliary database
RMAN-06000 could not open recovery manager library file: string
RMAN-06001 error parsing job step library
RMAN-06002 command not allowed when not connected to a recovery catalog
RMAN-06003 ORACLE error from target database: string
RMAN-06004 ORACLE error from recovery catalog database: string
RMAN-06005 connected to target database: string (DBID=string)
RMAN-06006 connected to target database: string (not mounted)
RMAN-06007 target database not mounted and db_name not set in init.ora
RMAN-06008 connected to recovery catalog database
RMAN-06009 using target database control file instead of recovery catalog
RMAN-06010 error while looking up datafile: string
RMAN-06011 invalid level specified: number
RMAN-06012 channel: string not allocated
RMAN-06013 duplicate channel identifier found: string
RMAN-06014 command not implemented yet: string
RMAN-06015 error while looking up datafile copy name: string
RMAN-06016 duplicate backup operand specified: string
RMAN-06017 initialization of parser failed
RMAN-06018 duplicate operand specified in backup specification: string
RMAN-06019 could not translate tablespace name "string"
RMAN-06020 connected to auxiliary database (not started)
RMAN-06021 FROM DATAFILECOPY/BACKUPSET may not be specified with archived logs
RMAN-06022 invalid level specified for image copy: number
RMAN-06023 no backup or copy of datafile number found to restore
RMAN-06024 no backup or copy of the control file found to restore
RMAN-06025 no backup of archived log for thread number with sequence number and starting SCN of string found to restore
RMAN-06026 some targets not found - aborting restore
RMAN-06027 no archived logs found that match specification
RMAN-06028 duplicate operand specified in restore specification: string
RMAN-06029 the control file may be included only in a datafile backup set
RMAN-06030 the DELETE [ALL] INPUT option may not be used with a datafile backup set
RMAN-06031 could not translate database keyword
RMAN-06032 at least 1 channel of TYPE DISK must be allocated to execute a COPY command
RMAN-06033 channel string not allocated
RMAN-06034 at least 1 channel must be allocated to execute this command
RMAN-06035 wrong version of recover.bsq, expecting string, found string
RMAN-06036 datafile number is already restored to file string
RMAN-06038 recovery catalog package detected an error
RMAN-06039 SET NEWNAME command has not been issued for datafile string
RMAN-06040 control file is already restored to file string
RMAN-06041 cannot switch file number to copy of file number
RMAN-06042 PLUS ARCHIVELOG option is not supported with non-datafile backups
RMAN-06043 TAG option not supported for archived log copies
RMAN-06045 LEVEL option not supported for archived log or current/standby control file copies
RMAN-06046 archived log name: string
RMAN-06047 duplicate datafile number specified for restoration from copy
RMAN-06048 duplicate control file specified for restoration from copy
RMAN-06049 CHECK LOGICAL option not supported for archived log or current/standby control file copies
RMAN-06050 archived log for thread number with sequence number is already on disk as file string
RMAN-06051 DELETE INPUT option not implemented yet
RMAN-06052 no parent backup or copy of datafile number found
RMAN-06053 unable to perform media recovery because of missing log
RMAN-06054 media recovery requesting unknown archived log for thread string with sequence string and starting SCN of string
RMAN-06055 could not find archived log with sequence string for thread string
RMAN-06056 could not access datafile number
RMAN-06057 a standby control file cannot be included along with a current control file
RMAN-06058 a current control file cannot be included along with a standby control file
RMAN-06059 expected archived log not found, loss of archived log compromises recoverability
RMAN-06060 WARNING: skipping datafile compromises tablespace string recoverability
RMAN-06061 WARNING: skipping archived log compromises recoverability
RMAN-06062 can not backup SPFILE because the instance was not started with SPFILE
RMAN-06063 DBID is not found in the recovery catalog
RMAN-06064 creating datafile file number=string name=string
RMAN-06065 The backup operand [string] conflicts with another specified operand.
RMAN-06066 the target database must be mounted when issuing a RECOVER command
RMAN-06067 RECOVER DATABASE required with a backup or created control file
RMAN-06068 recovery aborted because of missing datafiles
RMAN-06069 the file name for datafile string is missing in the control file
RMAN-06070 DBWR could not identify datafile string
RMAN-06071 could not open datafile string
RMAN-06073 file header is corrupt for datafile string
RMAN-06074 file string is not an ORACLE datafile
RMAN-06075 datafile string does not belong to this database
RMAN-06076 datafile string contains wrong datafile
RMAN-06077 datafile string is a different version than contained in the control file
RMAN-06078 the control file is older than datafile string
RMAN-06079 database must be mounted to perform recovery
RMAN-06080 SWITCH required for datafile string
RMAN-06081 error reading datafile header for datafile string, code string
RMAN-06082 datafile copy tag string is ambiguous
RMAN-06083 error when loading stored script string
RMAN-06084 the target database may not be mounted when issuing REPLICATE
RMAN-06085 must use SET NEWNAME command to restore datafile string
RMAN-06086 offline files may only be skipped in a datafile backup set
RMAN-06087 read-only files may only be skipped in a datafile backup set
RMAN-06088 datafile copy string not found or out of sync with catalog
RMAN-06089 archived log string not found or out of sync with catalog
RMAN-06090 error while looking up control file copy: string
RMAN-06091 no channel allocated for maintenance (of an appropriate type)
RMAN-06092 error while looking up backup piece
RMAN-06093 recovery catalog contains obsolete version of datafile string
RMAN-06094 datafile string must be restored
RMAN-06095 a backup control file must be restored to recover datafile string
RMAN-06096 SWITCH required for newname of datafile string to take effect
RMAN-06098 the target database must be mounted when issuing a BACKUP command
RMAN-06099 error occurred in source file: string, line: number
RMAN-06100 no channel to restore a backup or copy of datafile number
RMAN-06101 no channel to restore a backup or copy of the control file
RMAN-06102 no channel to restore a backup or copy of archived log for thread number with sequence number and starting SCN of string
RMAN-06103 duplicate qualifier found in REPORT command: string
RMAN-06105 duplicate qualifier found in LIST command: string
RMAN-06106 this command requires that target database be mounted
RMAN-06107 WARNING: control file is not current for REPORT NEED BACKUP DAYS
RMAN-06108 changed datafile copy unavailable
RMAN-06109 changed archived log unavailable
RMAN-06110 changed control file copy unavailable
RMAN-06111 changed backup piece unavailable
RMAN-06112 changed datafile copy available
RMAN-06113 changed archived log available
RMAN-06114 changed control file copy available
RMAN-06115 changed backup piece available
RMAN-06116 cannot crosscheck unavailable object
RMAN-06117 cannot do DELETE EXPIRED on an object which is not expired
RMAN-06118 a backup control file older than SCN string must be used for this recovery
RMAN-06119 uncataloged datafile copy
RMAN-06120 uncataloged archived log
RMAN-06121 uncataloged control file copy
RMAN-06122 CHANGE .. UNCATALOG not supported for BACKUPSET
RMAN-06123 operation not supported without the recovery catalog or mounted control file
RMAN-06124 error while looking up datafile copy key: number
RMAN-06125 error while looking up archived log key: number
RMAN-06126 skipping offline file string
RMAN-06127 skipping read-only file string
RMAN-06128 skipping inaccessible file string
RMAN-06129 invalid reserved channel ID: string
RMAN-06131 SKIP OFFLINE/READONLY only allowed with current control file
RMAN-06132 cannot backup datafile string because it is not in the control file
RMAN-06133 recovery catalog may have obsolete data for datafile string
RMAN-06134 host command complete
RMAN-06135 error executing host command: string
RMAN-06136 ORACLE error from auxiliary database: string
RMAN-06137 must have recovery catalog for REPORT SCHEMA AT TIME
RMAN-06138 control file not mounted - must specify AT clause with REPORT command
RMAN-06139 WARNING: control file is not current for REPORT SCHEMA
RMAN-06140 cannot specify TAG option with LIST INCARNATION
RMAN-06141 cannot specify ARCHIVELOG LIKE option with RESTORE
RMAN-06142 DEVICE TYPE cannot be specified with this command
RMAN-06143 LIKE may only be specified with COPY
RMAN-06144 FROM or UNTIL may not be specified with LIST INCARNATION
RMAN-06145 control file is not current - obsolete file list may be incomplete
RMAN-06146 changes found for file number beyond offline SCN
RMAN-06147 no obsolete backups found
RMAN-06148 redundancy count must be greater than zero
RMAN-06150 auxiliary name for datafile number set to: string
RMAN-06151 datafile string creation SCN string
RMAN-06153 validation failed for datafile copy
RMAN-06154 validation succeeded for datafile copy
RMAN-06155 validation failed for control file copy
RMAN-06156 validation succeeded for control file copy
RMAN-06157 validation failed for archived log
RMAN-06158 validation succeeded for archived log
RMAN-06159 error while looking up backup set
RMAN-06160 no backup pieces found for backup set key: number
RMAN-06161 error when inspecting auxiliary file name: string
RMAN-06162 sql statement: string
RMAN-06163 some datafiles cannot be recovered, aborting the RECOVER command
RMAN-06164 WARNING: no channel of required type allocated to recover datafile number
RMAN-06165 datafile string is too old to recover, restore a more recent copy
RMAN-06166 datafile string cannot be recovered
RMAN-06167 already connected
RMAN-06168 no backup pieces with this tag found: string
RMAN-06169 could not read file header for datafile string error reason string
RMAN-06170 no control file copy found with offline range RECID string STAMP string datafile string
RMAN-06171 not connected to target database
RMAN-06172 no AUTOBACKUP found or specified handle is not a valid copy or piece
RMAN-06173 SET NEWNAME command has not been issued for datafile string when restore auxiliary
RMAN-06174 not connected to auxiliary database
RMAN-06175 deleted script: string
RMAN-06176 no recovery required; all files are read only or offline
RMAN-06177 restore not done; all files read only, offline, or already restored
RMAN-06178 datafile number not processed because file is offline
RMAN-06179 datafile number not processed because file is read-only
RMAN-06180 incremental backups require Enterprise Edition
RMAN-06181 multiple channels require Enterprise Edition
RMAN-06182 archived log string of thread string with sequence string larger than MAXSETSIZE
RMAN-06183 datafile or datafile copy string (file number string) larger than MAXSETSIZE
RMAN-06184 duplicate object in backup specifier: string string
RMAN-06185 Recovery Manager incompatible with string database: RMAN number.number.number.number to number.number.number.number required
RMAN-06186 PL/SQL package string.string version string in string database is too old
RMAN-06187 control file copy string not found or out of sync with catalog
RMAN-06188 cannot use command when connected to a mounted target database
RMAN-06189 current DBID number does not match target mounted database (number)
RMAN-06190 PL/SQL package string.string version string in string database is not current
RMAN-06191 PL/SQL package string.string version string in string database is too new
RMAN-06192 maximum value for MAXPIECESIZE or MAXSETSIZE must be between 1 Kb and 2048 Gb
RMAN-06193 connected to target database (not started)
RMAN-06194 target database instance not started
RMAN-06195 auxiliary database not started
RMAN-06196 Oracle instance started
RMAN-06197 Total System Global Area string bytes
RMAN-06198 string string bytes
RMAN-06199 database mounted
RMAN-06200 Changed string objects to AVAILABLE status
RMAN-06201 Deleted string objects
RMAN-06202 Deleted string EXPIRED objects
RMAN-06203 Changed KEEP options for string objects
RMAN-06204 Changed string objects to UNAVAILABLE status
RMAN-06205 Uncataloged string objects
RMAN-06206 Crosschecked string objects
RMAN-06207 WARNING: string objects could not be deleted for string channel(s) due
RMAN-06208 to mismatched status. Use CROSSCHECK command to fix status
RMAN-06209 List of failed objects
RMAN-06210 List of Mismatched objects
RMAN-06211 ==========================
RMAN-06212 Object Type Filename/Handle
RMAN-06213 --------------- ---------------------------------------------------
RMAN-06214 string string
RMAN-06215 List of objects that must perform same operation at other database
RMAN-06216 WARNING: db_unique_name mismatch - string objects could not be updated
RMAN-06217 not connected to auxiliary database with a net service name
RMAN-06218 List of objects requiring same operation on database with db_unique_name string
RMAN-06219 List of objects not associated with all known db_unique_names
RMAN-06220 Creating automatic instance, with SID='string'
RMAN-06221 Removing automatic instance
RMAN-06223 starting up automatic instance string
RMAN-06224 Automatic instance created
RMAN-06225 shutting down automatic instance string
RMAN-06226 Automatic instance removed
RMAN-06230 List of Stored Scripts in Recovery Catalog
RMAN-06238 List of Databases
RMAN-06246 List of Database Incarnations
RMAN-06250 Report of files that need backup due to unrecoverable operations
RMAN-06263 string string string
RMAN-06270 Report of files whose recovery needs more than number days of archived logs
RMAN-06274 Report of files that must be backed up to satisfy number days recovery window
RMAN-06275 invalid number of days specified for report : string days
RMAN-06280 Report of obsolete backups and copies
RMAN-06290 Report of database schema for database with db_unique_name string
RMAN-06300 Report of files with less than number redundant backups
RMAN-06306 ====================
RMAN-06378 List of Backup Sets
RMAN-06400 database opened
RMAN-06401 database is already started
RMAN-06402 Oracle instance shut down
RMAN-06403 could not obtain a fully authorized session
RMAN-06404 database dismounted
RMAN-06405 database closed
RMAN-06406 deleted archived log
RMAN-06407 auxiliary instance file string deleted
RMAN-06408 recovery catalog upgraded to version string
RMAN-06409 LIKE clause in LIST BACKUP OF ARCHIVELOG is not supported
RMAN-06410 cannot use command when channels are allocated
RMAN-06411 backup copies setting out of range (1-4): number
RMAN-06412 no proxy copy channel found
RMAN-06413 channel string does not support proxy copy
RMAN-06414 target database COMPATIBLE option does not support proxy copy
RMAN-06415 file string cannot be proxy backed up
RMAN-06416 PROXY ONLY was specified and some files could not be proxy copied
RMAN-06417 command not allowed when connected to a virtual private catalog
RMAN-06418 proxy incremental backups with level > 0 not supported
RMAN-06419 file string cannot be proxy restored from handle string
RMAN-06420 some files could not be proxy restored - aborting restore
RMAN-06421 sent command to channel: string
RMAN-06422 no channels found for SEND command
RMAN-06423 requested limit of number exceeds vendor limit of number
RMAN-06424 error while looking up proxy copy
RMAN-06425 <datafile pathname not available>
RMAN-06426 RECOVERY_CATALOG_OWNER role must be granted to user string
RMAN-06427 recovery catalog already exists
RMAN-06428 recovery catalog is not installed
RMAN-06429 string database is not compatible with this version of RMAN
RMAN-06430 recovery catalog USERID cannot be SYS
RMAN-06431 recovery catalog created
RMAN-06432 recovery catalog dropped
RMAN-06433 error installing recovery catalog
RMAN-06434 some errors occurred while removing recovery catalog
RMAN-06435 recovery catalog owner is string
RMAN-06436 enter DROP CATALOG command again to confirm catalog removal
RMAN-06437 cannot drop catalog - catalog is newer than this RMAN
RMAN-06438 error executing package DBMS_RCVMAN in string database
RMAN-06439 RMAN must be upgraded to version string to work with this package
RMAN-06440 virtual catalog dropped
RMAN-06441 cannot upgrade catalog - catalog is already newer than this RMAN
RMAN-06442 enter UPGRADE CATALOG command again to confirm catalog upgrade
RMAN-06443 error upgrading recovery catalog
RMAN-06444 error creating string
RMAN-06445 cannot connect to recovery catalog after NOCATALOG has been used
RMAN-06446 changed proxy copy unavailable
RMAN-06447 changed proxy copy available
RMAN-06448 uncataloged proxy copy
RMAN-06449 deleted proxy copy
RMAN-06450 crosschecked proxy copy: found to be 'string'
RMAN-06451 proxy copy handle=string RECID=string STAMP=string
RMAN-06452 string package upgraded to version string
RMAN-06453 RECOVERABLE may only be used with datafile objects
RMAN-06454 duplexed backups require Enterprise Edition
RMAN-06455 Tablespace Point-in-Time Recovery requires Enterprise Edition
RMAN-06456 command is obsolete
RMAN-06457 UNTIL SCN (string) is ahead of last SCN in archived logs (string)
RMAN-06458 AS COPY option cannot be used with RECOVERY FILES, RECOVERY AREA or DB_RECOVERY_FILE_DEST
RMAN-06459 DURATION> is not supported with PROXY
RMAN-06460 control file copy string cannot be backed up by proxy.
RMAN-06461 current control file cannot be backed up by proxy.
RMAN-06462 no backup sets found on device DISK that match specification
RMAN-06463 Backup set key string cannot be backed up by proxy.
RMAN-06464 BACKUP BACKUPSET is not supported with VALIDATE option
RMAN-06465 configuration not implemented: string
RMAN-06466 error parsing configuration string (string)
RMAN-06467 could not translate DBA: number
RMAN-06468 Invalid Data Block Address: number
RMAN-06469 could not translate corruption list
RMAN-06470 DEVICE TYPE is supported only when automatic channels are used
RMAN-06471 no configuration found to allocate channels for string
RMAN-06472 channel id string is automatically allocated
RMAN-06473 SET DATABASE can only be used in case of DUPLICATE without TARGET connection
RMAN-06474 maintenance channels are not allocated
RMAN-06475 parallelism setting out of range (1-254): number
RMAN-06476 channel number out of range (1-254): number
RMAN-06477 configuration value length exceeds 1024
RMAN-06478 WARNING: datafile copy 'string' cannot be found on disk
RMAN-06479 WARNING: control file copy 'string' cannot be found on disk
RMAN-06480 WARNING: archived log 'string' cannot be found on disk
RMAN-06481 WARNING: backup piece 'string' cannot be found on the storage medium
RMAN-06482 WARNING: proxy copy 'string' cannot be found on the storage medium
RMAN-06483 changed datafile copy expired
RMAN-06484 changed control file copy expired
RMAN-06485 changed archived log expired
RMAN-06486 changed backup piece expired
RMAN-06487 changed proxy copy expired
RMAN-06488 restore from AUTOBACKUP does not allow any other modifiers
RMAN-06489 no configuration found to allocate clone channel number for device type string
RMAN-06490 WARNING: limit of AUTOBACKUPS for the day has been reached
RMAN-06491 control file AUTOBACKUP format "string" contains more than one "string" format specifier
RMAN-06492 control file AUTOBACKUP format "string" must specify a "string" format specifier
RMAN-06493 only UNTIL TIME clause is allowed when performing a restore from AUTOBACKUP, found: string
RMAN-06494 string = string is out of range (string-string)
RMAN-06495 must explicitly specify DBID with SET DBID command
RMAN-06496 must use the TO clause when the database is mounted or open
RMAN-06497 WARNING: control file is not current, control file AUTOBACKUP skipped
RMAN-06498 skipping datafile string; already backed up string time(s)
RMAN-06499 skipping archived log file string; already backed up string time(s)
RMAN-06500 skipping backup set key string; already backed up string time(s)
RMAN-06501 skipping datafile string; already backed up on string
RMAN-06502 skipping archived log file string; already backed on string
RMAN-06503 skipping backup set key string; already backed up on string
RMAN-06504 PROXY option with multiple backup copies is not supported
RMAN-06505 specified DATABASE: string does not match previous DATABASE: string
RMAN-06506 the MAXSETSIZE option cannot be used with a backup backup set
RMAN-06507 trying alternate file for archived log of thread number with sequence number
RMAN-06508 MAXSETSIZE string KBYTES should be greater than block size string bytes
RMAN-06509 only SPFILE or control file can be restored from AUTOBACKUP
RMAN-06510 RMAN retention policy is set to recovery window of number days
RMAN-06511 RMAN retention policy is set to redundancy number
RMAN-06512 copy will be obsolete on date string
RMAN-06513 copy will never be obsolete
RMAN-06514 archived logs required to recover from this copy will not be kept
RMAN-06515 archived logs required to recover from this copy will expire when this copy expires
RMAN-06516 time specified in KEEP UNTIL clause must be be after today
RMAN-06517 KEEP option is not supported for archived log backups
RMAN-06518 backup will be obsolete on date string
RMAN-06519 backup will never be obsolete
RMAN-06520 archived logs will not be kept or backed up
RMAN-06521 archived logs required to recover from this backup will expire when this backup expires
RMAN-06522 KEEP FOREVER option is not supported without the recovery catalog
RMAN-06524 RMAN retention policy will be applied to the command
RMAN-06525 RMAN retention policy is set to none
RMAN-06526 KEEP option cannot be used with incremental backup
RMAN-06527 KEEP option is not supported for backup of backup sets
RMAN-06528 CHANGE ... KEEP not supported for BACKUPPIECE
RMAN-06529 CHANGE ... KEEP not supported for ARCHIVELOG
RMAN-06530 CHANGE ... KEEP LOGS not supported for backup set which contains archived logs
RMAN-06531 CHANGE ... KEEP not supported for incremental BACKUPSET
RMAN-06532 redundancy count must be greater than zero
RMAN-06533 KEEP ... NOLOGS option cannot be used when datafiles are fuzzy
RMAN-06534 archived logs required to recover from this backup will be backed up
RMAN-06535 LIST COPY OF SPFILE is not supported
RMAN-06536 BACKED UP ... TIMES option is supported only for archived logs
RMAN-06537 CHANGE ... KEEP not supported for BACKUP
RMAN-06538 The expected DB_UNIQUE_NAME is string, but found string
RMAN-06540 Tablespace string will be excluded from future whole database backups
RMAN-06541 Tablespace string will be included in future whole database backups
RMAN-06542 file string is excluded from whole database backup
RMAN-06543 duplicate or conflicting LIST options: string and string
RMAN-06547 SYSTEM tablespace cannot be excluded from whole database backup
RMAN-06548 connected to auxiliary database: string (DBID=string)
RMAN-06549 connected to auxiliary database: string (not mounted)
RMAN-06550 clone database not mounted and db_name not set in init.ora
RMAN-06551 error while looking up datafile copy for file number: string
RMAN-06552 newname for datafile number was set to NEW, but file was not restored
RMAN-06553 DB_CREATE_FILE_DEST must be set for SET NEWNAME ... TO NEW
RMAN-06554 WARNING: file string is in backup mode
RMAN-06555 datafile string must be restored from backup created before string
RMAN-06556 datafile string must be restored from backup older than SCN string
RMAN-06557 unable to restore archived log of thread number with sequence number
RMAN-06558 archived log size of number kb is bigger than available space of number kb
RMAN-06559 MAXSIZE must be larger than 1 kb
RMAN-06560 WARNING: backup set with key number will be read number times
RMAN-06561 available space must be larger than number kb
RMAN-06562 available space of number kb needed to avoid reading the backup set multiple times
RMAN-06563 control file or SPFILE must be restored using FROM AUTOBACKUP
RMAN-06564 must use the TO clause when the instance is started with SPFILE
RMAN-06565 WARNING: string: sqlcode number was caught, automatic retry #number
RMAN-06566 target database incarnation not found in control file
RMAN-06567 connected to auxiliary database: string (DBID=string, not open)
RMAN-06568 connected to target database: string (DBID=string, not open)
RMAN-06569 DATABASE: string does not match previous DATABASE: string
RMAN-06570 datafile number switched to datafile copy "string"
RMAN-06571 datafile number does not have recoverable copy
RMAN-06572 database is open and datafile number is not offline
RMAN-06573 specified DBID: string does not match previous DBID: string
RMAN-06575 platform id number found in datafile string header is not a valid platform id
RMAN-06576 platform 'string' (number) found in header of datafile string does not match specified platform name 'string' (number)
RMAN-06577 FROM TAG option may only be used with datafile copies
RMAN-06578 INCREMENTAL LEVEL > 0 must be specified with FOR RECOVER OF
RMAN-06580 the string option cannot be used with AS COPY
RMAN-06581 option string not supported
RMAN-06582 AS COPY option cannot be used when backing up backup sets
RMAN-06583 at least 1 channel of TYPE DISK must be allocated to use AS COPY option
RMAN-06584 WARNING: AS BACKUPSET option added due to allocation of multiple channel types
RMAN-06585 no copy of datafile number found
RMAN-06586 no copy of datafile number with tag string found
RMAN-06587 one or more datafile copies were not found
RMAN-06588 number of patterns (number) to DB_FILE_NAME_CONVERT should be even
RMAN-06589 cannot specify DB_FILE_NAME_CONVERT option without AS COPY
RMAN-06590 Tablespace string cannot be converted
RMAN-06593 platform name 'string' specified in FROM PLATFORM is not valid
RMAN-06594 platform name 'string' specified in TO PLATFORM is not valid
RMAN-06595 platform name 'string' does not match database platform name 'string'
RMAN-06596 string requires target database compatibility string, currently set to string
RMAN-06597 conversion between platforms 'string' and 'string' is not implemented
RMAN-06599 Tablespace string is not read-only
RMAN-06600 old RMAN configuration parameters:
RMAN-06601 new RMAN configuration parameters:
RMAN-06602 TO DESTINATION option can be used only for disk device
RMAN-06603 TO DESTINATION option must be specified with RECOVERY AREA, RECOVERY FILES or DB_RECOVERY_FILE_DEST on disk device
RMAN-06604 new RMAN configuration parameters are successfully stored
RMAN-06605 old RMAN configuration parameters are successfully deleted
RMAN-06606 RMAN configuration parameters are successfully reset to default value
RMAN-06607 RMAN configuration parameters for database with db_unique_name string are:
RMAN-06608 RMAN configuration has no stored or default parameters
RMAN-06609 AS COPY can be configured only for disk device
RMAN-06610 For record type string RECIDS from number to number are re-used before resync
RMAN-06611 Following RMAN configuration applied before deleting logs:
RMAN-06612 Incompatible options were specified for archivelog deletion policy
RMAN-06613 Connect identifier for DB_UNIQUE_NAME string not configured
RMAN-06614 DB_UNIQUE_NAME string is too long
RMAN-06615 resyncing from database with DB_UNIQUE_NAME string
RMAN-06616 RMAN output not resynced for database with DB_UNIQUE_NAME string
RMAN-06617 UNTIL TIME (string) is ahead of last NEXT TIME in archived logs (string)
RMAN-06700 error parsing text script in file string
RMAN-06701 could not construct path for file: "string"
RMAN-06702 could not initialize for input file: "string"
RMAN-06703 could not open file: "string" (reason=string)
RMAN-06705 text script line is too long (>1024)
RMAN-06706 could not close file: "string" (reason=string)
RMAN-06707 could not initialize for output file: "string"
RMAN-06708 short write while writing file "string". Wrote string bytes instead of string bytes
RMAN-06709 No scripts in recovery catalog
RMAN-06710 script string not found in catalog
RMAN-06711 global scripts require a TARGET connection
RMAN-06716 skipping datafile number; already restored to file string
RMAN-06717 Could not delete auxiliary instance file string
RMAN-06724 backup not done; all files already backed up
RMAN-06725 database not open: sort area size too small
RMAN-06726 could not locate archived log string
RMAN-06727 could not locate datafile copy string
RMAN-06728 could not locate control file copy string
RMAN-06729 no backup of the SPFILE found to restore
RMAN-06730 no channel to restore a backup of the SPFILE
RMAN-06731 command string:string% complete, time left number:number:number
RMAN-06732 database dropped
RMAN-06733 database unregistered from the recovery catalog
RMAN-06737 database name "string" does not match target database name "string"
RMAN-06738 database name "string" is not unique in the recovery catalog
RMAN-06739 database "string" is not found in the recovery catalog
RMAN-06740 database name is not specified
RMAN-06741 database name is "string" and DBID is string
RMAN-06742 platform name 'string' longer than number
RMAN-06743 specification does not match any backup set in the repository
RMAN-06744 specification does not match any datafile copy in the repository
RMAN-06745 skipping datafile copy string; already backed up string time(s)
RMAN-06746 backup cancelled because there are no files to backup
RMAN-06747 at least 1 channel of tertiary storage must be allocated to execute this command
RMAN-06748 more than one channel types were allocated
RMAN-06749 restore point string does not exist.
RMAN-06750 SPFILE cannot be backed up by proxy.
RMAN-06751 ASM file string cannot be proxy backed up.
RMAN-06752 error while looking up tempfile: string
RMAN-06753 tempfile not found in the repository
RMAN-06754 INCREMENTAL FROM SCN option is not supported with [string]
RMAN-06755 WARNING: datafile string: incremental-start SCN is too recent; using checkpoint SCN string instead
RMAN-06756 cannot flashback database to non-guaranteed restore point string when flashback is off
RMAN-06757 DB_UNIQUE_NAME "string" does not match target database ("string")
RMAN-06758 DB_UNIQUE_NAME is not unique in the recovery catalog
RMAN-06759 skipping datafile copies that are already backed up
RMAN-06760 skipping archived logs that are already backed up
RMAN-06761 skipping backup sets that are already backed up
RMAN-06762 ignoring encryption for proxy or image copies
RMAN-06763 specified encryption algorithm not supported
RMAN-06764 string
RMAN-06765 Tablespace string will be encrypted in future backup sets
RMAN-06766 Tablespace string will not be encrypted in future backup sets
RMAN-06767 Tablespace string will default to database encryption configuration
RMAN-06768 duplicate or conflicting options are specified: string and string
RMAN-06769 length of password must be greater than zero
RMAN-06770 backup encryption requires Enterprise Edition
RMAN-06771 cannot do IMPORT CATALOG after NOCATALOG has been used
RMAN-06772 cannot do IMPORT CATALOG before connecting to recovery catalog
RMAN-06773 connected to source recovery catalog database
RMAN-06774 must specify a TNS service name for source recovery catalog database
RMAN-06775 not connected to source recovery catalog database
RMAN-06776 source recovery catalog database not started
RMAN-06777 ORACLE error from source recovery catalog database: string
RMAN-06778 WARNING: string: sqlcode number was caught, automatic retry #string
RMAN-06779 import validation complete
RMAN-06780 database unregistered from the source recovery catalog
RMAN-06781 string package version string in source database is not of version string
RMAN-06782 Datafile headers of locally managed datafiles need to be updated.
RMAN-06783 Update of datafile headers of locally managed datafiles finished.
RMAN-06784 One or more datafile headers of locally managed datafiles were not updated.
RMAN-06785 This operation might take some time.
RMAN-06786 could not read file header for datafile string to do FLASHBACK.
RMAN-06787 WARNING: TAG string option is ignored; backups will be tagged with string
RMAN-06791 changed the DB_UNIQUE_NAME value from string to string
RMAN-06792 database db_unique_name is "string", db_name is "string" and DBID is string
RMAN-06793 database with db_unique_name string unregistered from the recovery catalog
RMAN-06795 Flashback database logging is not on.
RMAN-06796 Not enough flashback database log data to do FLASHBACK.
RMAN-06797 Grant succeeded.
RMAN-06798 Revoke succeeded.
RMAN-06799 found eligible base catalog owned by string
RMAN-06800 found ineligible base catalog owned by string
RMAN-06801 no base catalog found
RMAN-06802 too many eligible base catalogs found
RMAN-06803 created virtual catalog against base catalog owned by string
RMAN-06804 Enter value for string:
RMAN-06805 SET NEWNAME command has not been issued for tempfile string
RMAN-06806 compression algorithm 'string' of release string not found
RMAN-06807 compression algorithm 'string' of release string cannot be used because database compatibility is less than string
RMAN-06808 SECTION SIZE cannot be used when piece limit is in effect
RMAN-06809 compression algorithm 'string' of release string requires advanced compression option
RMAN-06810 specification does not match any datafile copy in the repository
RMAN-06811 specification does not match any control file copy in the repository
RMAN-06812 specification does not match any backup in the repository
RMAN-06818 WARNING: last archived log from primary database not recieved at standby database
RMAN-06819 current log archived at primary database
RMAN-06820 WARNING: failed to archive current log at primary database
RMAN-06898 recovery catalog is partially upgraded to string
RMAN-06899 updating recovery catalog with new database incarnation
RMAN-06900 WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901 WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
RMAN-06902 AS COMPRESSED BACKUPSET option cannot be used when backing up backup sets
RMAN-06903 backup of datafile string was cancelled
RMAN-06904 backup of archived log for thread number with sequence number and starting SCN of string was cancelled
RMAN-06905 backup of backup set key number was cancelled
RMAN-06906 backup of control file was cancelled
RMAN-06907 MINIMIZE LOAD option not allowed for the specified input files
RMAN-06908 WARNING: operation will not run in parallel on the allocated channels
RMAN-06909 WARNING: parallelism require Enterprise Edition
RMAN-06910 can not invoke parallel recovery for test recovery
RMAN-06911 only one PARALLEL or NOPARALLEL clause may be specified
RMAN-06912 backup of spfile was cancelled
RMAN-06913 validate cancelled because there are no files to validate
RMAN-06914 BLOCK string must be greater or equal to BLOCK string
RMAN-06915 restore point string already exists
RMAN-06918 WARNING: allocated SBT channel to Oracle Availability Machine in NOCATALOG mode
RMAN-06920 database string is not open read-only
RMAN-06921 Convert database check failed
RMAN-06922 External table string.string found in the database
RMAN-06923 Directory string.string found in the database
RMAN-06924 BFILE string.string found in the database
RMAN-06925 BFILEs are used in the system, please redefine them in the transported database
RMAN-06926 User string with string privilege found in password file
RMAN-06927 Cannot specify NEW DATABASE clause more than once
RMAN-06928 Cannot specify ON TARGET PLATFORM clause more than once
RMAN-06929 Cannot specify TRANSPORT SCRIPT clause more than once
RMAN-06930 Cannot specify SKIP clause more than once
RMAN-06931 Cannot specify FROM PLATFORM clause
RMAN-06932 Database name 'string' longer than number
RMAN-06933 Transport script name too long
RMAN-06934 Format string too long
RMAN-06935 Convert script name too long
RMAN-06941 Database must be closed and mounted EXCLUSIVE and RESTRICTED.
RMAN-06942 OPTION number is invalid; OPTION must be between string and string
RMAN-06943 no automatic repair OPTION number was listed in ADVISE FAILURE
RMAN-06944 contents of repair script:
RMAN-06945 no repair script present for REPAIRID string
RMAN-06946 executing repair script
RMAN-06947 searching flashback logs for block images until SCN string
RMAN-06948 searching flashback logs for block images
RMAN-06949 finished flashback log search, restored string blocks
RMAN-06950 invalid validate option specified: string
RMAN-06951 repair failure complete
RMAN-06952 database needs to be restarted
RMAN-06953 no automatic repairs were listed by ADVISE FAILURE
RMAN-06954 REPAIR command must be preceded by ADVISE command in same session
RMAN-06955 Network copies are only supported for image copies.
RMAN-06956 create datafile failed; retry after removing string from OS
RMAN-06957 finished standby search, restored string blocks
RMAN-06958 Executing: string
RMAN-06959 WARNING: repair completed but could not verify that failures were fixed by it
RMAN-06960 EXPDP> string
RMAN-06961 IMPDP> string
RMAN-06962 Error received during export of metadata
RMAN-06963 Error received during import of metadata
RMAN-06964 option string cannot be used with string
RMAN-06965 Datapump job has stopped
RMAN-06966 Invalid release number string
RMAN-06967 finished primary search, recovered string blocks
RMAN-06970 NEWNAME 'string' for database must include %f or %U format
RMAN-06971 NEWNAME 'string' for tablespace must include %f or %U format
RMAN-06980 The following errors need to be fixed before peforming this command
RMAN-06981 Violation: string
RMAN-07000 List of SPFILE Backups
RMAN-07025 string is not supported for foreign archived log
RMAN-07200 no failures found that match specification
RMAN-07207 changed string failures to HIGH priority
RMAN-07208 changed string failures to LOW priority
RMAN-07209 closed string failures
RMAN-07210 new failures after most recent LIST FAILURE command
RMAN-07211 failure option not specified
RMAN-07212 skipping failure string because it was CLOSED
RMAN-07213 Mandatory Manual Actions
RMAN-07215 Automated Repair Options
RMAN-07220 no manual actions available
RMAN-07222 =======================
RMAN-07251 Repair script: string
RMAN-07252 ========================
RMAN-07253 ========================
RMAN-07255 priority change for failure string failed
RMAN-07256 cannot change priority of child failure
RMAN-07259 string critical failures exist; cannot exclude from ADVISE FAILURE
RMAN-07262 no automatic repair options available
RMAN-07500 searching for all files that match the pattern string
RMAN-07501 searching for all files in the recovery area
RMAN-07502 List of Files Unknown to the Database
RMAN-07505 no files found to be unknown to the database
RMAN-07507 cataloging files...
RMAN-07508 cataloging done
RMAN-07509 List of Cataloged Files
RMAN-07513 List of Files Which Where Not Cataloged
RMAN-07514 =======================================
RMAN-07515 File Name: string
RMAN-07516 Reason: Error reading
RMAN-07517 Reason: The file header is corrupted
RMAN-07518 Reason: Foreign database file DBID: string Database Name: string
RMAN-07519 Reason: Error while cataloging. See alert.log.
RMAN-07520 Reason: Data pump dump file
RMAN-07521 cannot create recovery catalog in database version string; version string required
RMAN-07522 CREATE TYPE privilege must be granted to user string
RMAN-07523 List of files in Recovery Area not managed by the database
RMAN-07524 ==========================================================
RMAN-07525 Reason: File is not a supported file type in Recovery Area
RMAN-07526 Reason: File is not an Oracle Managed File
RMAN-07527 Reason: File was not created using DB_RECOVERY_FILE_DEST initialization parameter
RMAN-07528 number of files not managed by recovery area is string, totaling string
RMAN-07529 Reason: catalog is not supported for this file type
RMAN-07530 Reason: This file type is not requested for cataloging
RMAN-08000 channel string: copied datafile string
RMAN-08001 restore not complete
RMAN-08002 starting full resync of recovery catalog
RMAN-08003 channel string: reading from backup piece string
RMAN-08004 full resync complete
RMAN-08005 new incarnation of database registered in recovery catalog
RMAN-08006 database registered in recovery catalog
RMAN-08007 channel string: copied datafile copy of datafile string
RMAN-08008 channel string: starting full datafile backup set
RMAN-08009 channel string: starting archived log backup set
RMAN-08010 channel string: specifying datafile(s) in backup set
RMAN-08011 including current control file in backup set
RMAN-08012 including control file copy in backup set
RMAN-08013 channel string: backup piece string
RMAN-08014 channel string: specifying archived log(s) in backup set
RMAN-08015 datafile string switched to datafile copy
RMAN-08016 channel string: starting datafile backup set restore
RMAN-08017 channel string: starting archived log restore to default destination
RMAN-08018 channel string: starting archived log restore to user-specified destination
RMAN-08019 channel string: restoring datafile string
RMAN-08020 including standby control file in backup set
RMAN-08021 channel string: restoring control file
RMAN-08022 channel string: restoring archived log
RMAN-08023 channel string: restored backup piece string
RMAN-08025 channel string: copied control file copy
RMAN-08026 channel string: copied archived log
RMAN-08027 channel string: copied current control file
RMAN-08028 channel string: copy current control file failed
RMAN-08029 snapshot control file name set to default value: string
RMAN-08030 allocated channel: string
RMAN-08031 released channel: string
RMAN-08032 channel string: RECID string STAMP string does not match recovery catalog
RMAN-08033 channel string: including datafile copy of datafile string in backup set
RMAN-08034 full resync skipped, target database not mounted
RMAN-08035 partial resync skipped, target database not mounted
RMAN-08036 channel string: could not create control file record for string string
RMAN-08037 channel string: unexpected validation return code string
RMAN-08038 channel string: starting piece string at string
RMAN-08039 channel string: starting incremental datafile backup set restore
RMAN-08040 full resync skipped, control file is not current or backup
RMAN-08041 partial resync skipped, control file is not current or backup
RMAN-08042 channel string: copied standby control file
RMAN-08043 channel string: copy standby control file failed
RMAN-08044 channel string: finished piece string at string
RMAN-08045 channel string: finished piece string at string with string copies
RMAN-08046 channel string: starting compressed full datafile backup set
RMAN-08047 channel string: starting compressed incremental level string datafile backup set
RMAN-08048 channel string: starting incremental level string datafile backup set
RMAN-08049 channel string: starting compressed archived log backup set
RMAN-08050 cataloged datafile copy
RMAN-08051 cataloged archived log
RMAN-08052 cataloged control file copy
RMAN-08053 channel string: finished piece string at string with string copies and tag string
RMAN-08054 starting media recovery
RMAN-08056 skipping datafile string because it has not changed
RMAN-08057 channel string: backup cancelled because all files were skipped
RMAN-08058 replicating control file
RMAN-08059 media recovery failed
RMAN-08060 unable to find archived log
RMAN-08061 WARNING: change failure ID string failed due to error ORA-string
RMAN-08062 WARNING: cannot change priority of a critical failure string
RMAN-08063 Recovery catalog is down or not connected to catalog, trying to reconnect.
RMAN-08064 Reconnection with the recovery catalog is successful.
RMAN-08065 WARNING: Reconnection with the recovery catalog failed, switching to nocatalog mode.
RMAN-08066 database reset to incarnation string
RMAN-08070 deleted datafile copy
RMAN-08071 channel string: deleting archived log(s)
RMAN-08072 deleted control file copy
RMAN-08073 deleted backup piece
RMAN-08074 crosschecked backup piece: found to be 'string'
RMAN-08085 created script string
RMAN-08086 replaced script string
RMAN-08087 channel string: started backup set validation
RMAN-08088 applied offline range to datafile string
RMAN-08089 channel string: specifying datafile(s) to restore from backup set
RMAN-08090 channel string: starting proxy restore
RMAN-08091 channel string: specifying datafile(s) for proxy backup
RMAN-08092 channel string: specifying datafile copy of datafile string for proxy backup
RMAN-08093 specifying current control file for proxy backup
RMAN-08094 channel string: specifying datafile(s) for proxy restore
RMAN-08096 channel string: starting validation of datafile backup set
RMAN-08097 channel string: starting validation of archived log backup set
RMAN-08099 specifying standby control file for proxy backup
RMAN-08100 channel string: starting proxy validation
RMAN-08101 channel string: proxy validation complete
RMAN-08102 channel string: located backup piece: string
RMAN-08103 channel string: could not locate backup piece: string
RMAN-08104 channel string: input backup set: count=string, stamp=string, piece=string
RMAN-08105 channel string: backup cancelled because no pieces were found
RMAN-08106 channel string: restoring block(s)
RMAN-08107 skipping inaccessible backup set count=string STAMP=string
RMAN-08108 channel string: specifying block(s) to restore from backup set
RMAN-08109 channel string: restored block(s) from backup piece string
RMAN-08110 failover to next copy of backup piece
RMAN-08111 some blocks not recovered: See trace file for details
RMAN-08112 archived log failover was done on string, check alert log for more info
RMAN-08113 including current SPFILE in backup set
RMAN-08114 channel string: restoring SPFILE to PFILE
RMAN-08115 channel string: restoring SPFILE
RMAN-08116 output file name is original SPFILE location
RMAN-08117 channel string: the AUTOBACKUP does not contain an SPFILE
RMAN-08118 WARNING: could not delete the following archived redo log
RMAN-08119 skipping backup piece handle string; already exists
RMAN-08120 WARNING: archived log not deleted, not yet applied by standby
RMAN-08121 keep attributes for the backup are deleted
RMAN-08122 keep attributes for the backup are changed
RMAN-08123 keep attributes for the datafile/control file copy are deleted
RMAN-08124 keep attributes for the datafile/control file copy are changed
RMAN-08125 keep attributes for the proxy copy are deleted
RMAN-08126 keep attributes for the proxy copy are changed
RMAN-08127 cataloged backup piece
RMAN-08128 uncataloged backup piece
RMAN-08129 failover to piece handle=string tag=string
RMAN-08130 failover to copy on device type string
RMAN-08131 channel string: specifying datafile copies to recover
RMAN-08132 WARNING: cannot update recovery area reclaimable file list
RMAN-08133 channel string: the AUTOBACKUP does not contain a standby control file.
RMAN-08135 some corrupt blocks found during conversion of file string
RMAN-08136 channel string: deleting incremental backup(s)
RMAN-08137 WARNING: archived log not deleted, needed for standby or upstream capture process
RMAN-08138 WARNING: archived log not deleted - must create more backups
RMAN-08139 WARNING: archived redo log not deleted, needed for guaranteed restore point
RMAN-08140 channel string: starting validation of datafile
RMAN-08141 channel string: specifying datafile(s) for validation
RMAN-08142 including standby control file for validation
RMAN-08143 including current control file for validation
RMAN-08144 channel string: validation complete, elapsed time: string
RMAN-08145 channel string: starting validation of archived log
RMAN-08146 channel string: specifying archived log(s) for validation
RMAN-08150 created global script string
RMAN-08151 replaced global script string
RMAN-08152 global script string written to file string
RMAN-08153 deleted global script: string
RMAN-08154 deleted script: string
RMAN-08155 printing stored global script: string
RMAN-08156 printing stored script: string
RMAN-08157 script string written to file string
RMAN-08158 executing script: string
RMAN-08159 executing global script: string
RMAN-08160 script commands will be loaded from file string
RMAN-08161 contents of Memory Script:
RMAN-08162 executing Memory Script
RMAN-08163 validation succeeded for backup piece
RMAN-08164 validation succeeded for proxy copy
RMAN-08165 could not locate proxy copy string
RMAN-08166 validation succeeded for datafile copy and control file copy
RMAN-08167 WARNING: string encountered a piece that was in use
RMAN-08180 channel string: restore complete, elapsed time: string
RMAN-08181 media recovery complete, elapsed time: string
RMAN-08182 channel string: validation complete, elapsed time: string
RMAN-08183 channel string: block restore complete, elapsed time: string
RMAN-08184 added tempfile string to tablespace string in control file
RMAN-08185 renamed tempfile string to string in control file
RMAN-08186 tempfile string size altered in control file
RMAN-08187 WARNING: media recovery until SCN string complete
RMAN-08190 validate found one or more corrupt blocks
RMAN-08191 See trace file string for details
RMAN-08300 Run SQL script string on the target platform to create database
RMAN-08301 Edit init.ora file string. This PFILE will be used to create the database on the target platform
RMAN-08302 Run RMAN script string on target platform to convert datafiles
RMAN-08303 To recompile all PL/SQL modules, run utlirp.sql and utlrp.sql on the target platform
RMAN-08304 To change the internal database identifier, use DBNEWID Utility
RMAN-08305 channel string: starting to check datafiles
RMAN-08306 channel string: datafile checking complete, elapsed time: string
RMAN-08500 channel string: SID=string device type=string
RMAN-08501 output file name=string RECID=string STAMP=string
RMAN-08503 piece handle=string comment=string
RMAN-08504 input archived log thread=string sequence=string RECID=string STAMP=string
RMAN-08505 output file name=string
RMAN-08506 input file name=string
RMAN-08507 input datafile copy RECID=string STAMP=string file name=string
RMAN-08508 archived log destination=string
RMAN-08509 destination for restore of datafile string: string
RMAN-08510 archived log thread=string sequence=string
RMAN-08511 piece handle=string tag=string
RMAN-08512 waiting for snapshot control file enqueue
RMAN-08513 datafile copy file name=string RECID=string STAMP=string
RMAN-08514 archived log file name=string RECID=string STAMP=string
RMAN-08515 archived log file name=string thread=string sequence=string
RMAN-08516 control file copy file name=string RECID=string STAMP=string
RMAN-08517 backup piece handle=string RECID=string STAMP=string
RMAN-08518 channel string: scanning control file copy string
RMAN-08519 channel string: scanning datafile copy string
RMAN-08520 channel string: scanning archived log string
RMAN-08521 offline range RECID=string STAMP=string
RMAN-08522 input datafile file number=string name=string
RMAN-08523 restoring datafile string to string
RMAN-08524 input control file copy name=string
RMAN-08525 backing up blocks string through string
RMAN-08526 channel string: string
RMAN-08527 channel string: starting string proxy datafile backup at string
RMAN-08528 channel string: proxy copy complete, elapsed time: string
RMAN-08529 proxy file handle=string
RMAN-08530 piece handle=string tag=string comment=string
RMAN-08531 channel string: proxy copy string is string in media management catalog
RMAN-08532 channel string: restoring block(s) from datafile copy string
RMAN-08533 restoring blocks of datafile string
RMAN-08534 channel string: control file restore from AUTOBACKUP complete
RMAN-08535 channel string: looking for AUTOBACKUP on day: string
RMAN-08536 channel string: AUTOBACKUP found: string
RMAN-08537 channel string: skipped, AUTOBACKUP already found
RMAN-08538 channel string: no AUTOBACKUP in string days found
RMAN-08539 backup set key=string RECID=string STAMP=string
RMAN-08540 channel string: backup set complete, elapsed time: string
RMAN-08541 channel string: SPFILE restore from AUTOBACKUP complete
RMAN-08542 channel string: starting proxy archived log backup at string
RMAN-08543 channel string: specifying archived log(s) for proxy backup
RMAN-08544 channel string: specifying archived log(s) for proxy restore
RMAN-08545 flashback command failed: See trace file for details
RMAN-08546 channel string: AUTOBACKUP string found in the recovery area
RMAN-08547 channel string: no AUTOBACKUPS found in the recovery area
RMAN-08548 recovery area destination: string
RMAN-08549 database name (or database unique name) used for search: string
RMAN-08550 AUTOBACKUP search with format "string" not attempted because DBID was not set
RMAN-08551 recovering datafile copy file number=string name=string
RMAN-08552 backup and output file names are identical: string
RMAN-08553 channel string: restoring control file from AUTOBACKUP string
RMAN-08554 channel string: restoring spfile from AUTOBACKUP string
RMAN-08555 channel string: restoring section string of string
RMAN-08556 channel string: backup piece complete, elapsed time: string
RMAN-08580 channel string: starting datafile copy
RMAN-08581 channel string: datafile copy complete, elapsed time: string
RMAN-08582 channel string: starting archived log copy
RMAN-08583 channel string: archived log copy complete, elapsed time: string
RMAN-08584 copying current control file
RMAN-08585 copying standby control file
RMAN-08586 output file name=string tag=string RECID=string STAMP=string
RMAN-08587 input is copy of datafile string: string
RMAN-08588 converted datafile=string
RMAN-08589 channel string: starting datafile conversion
RMAN-08590 channel string: datafile conversion complete, elapsed time: string
RMAN-08591 WARNING: invalid archived log deletion policy
RMAN-08592 output file name=string tag=string
RMAN-08599 channel string: throttle time: string
RMAN-08600 ASM disk group to search: string
RMAN-08601 channel string: AUTOBACKUP string found in ASM disk group string
RMAN-08602 channel string: no AUTOBACKUPS found in ASM disk group string
RMAN-08603 skipping string; file in use by another process
RMAN-08604 skipping string; file deleted from recovery area to reclaim disk space
RMAN-08605 channel string: SID=string instance=string device type=string
RMAN-08606 WARNING: The change tracking file is invalid.
RMAN-08607 List of remote backup files
RMAN-08608 Initiated recall for the following list of remote backup files
RMAN-08609 channel string: starting incremental datafile backup set
RMAN-08610 channel string: restoring datafile string to string
RMAN-08611 channel string: piece handle=string tag=string
RMAN-08612 channel string: failover to duplicate backup on device string
RMAN-08613 channel string: failover to piece handle=string tag=string
RMAN-08614 channel string: errors found reading piece handle=string
RMAN-08615 channel string
RMAN-08616 validating blocks string through string
RMAN-08617 validation failed for foreign archived log
RMAN-08618 validation succeeded for foreign archived log
RMAN-08619 foreign archived log file name=string RECID=string STAMP=string
RMAN-08620 uncataloged foreign archived log
RMAN-08621 deleted foreign archived log
RMAN-08629 waiting for resources on Oracle Availability Machine for string channels
RMAN-08630 allocating the required resources on Oracle Availability Machine
RMAN-10000 error parsing target database connect string "string"
RMAN-10001 error parsing recovery catalog connect string "string"
RMAN-10002 ORACLE error: string
RMAN-10003 unable to connect to target database
RMAN-10004 unable to connect to recovery catalog
RMAN-10005 error opening cursor
RMAN-10006 error running SQL statement: string
RMAN-10007 error closing cursor
RMAN-10008 could not create channel context
RMAN-10009 error logging off of Oracle
RMAN-10010 error while checking for RPC completion
RMAN-10011 synchronization error while polling for rpc number, action=string
RMAN-10012 KGU error: string
RMAN-10013 error initializing PL/SQL
RMAN-10014 PL/SQL error number on line number column number: string
RMAN-10015 error compiling PL/SQL program
RMAN-10018 error cleaning up channel context
RMAN-10020 error initializing Recovery Manager execution layer
RMAN-10022 error in system-dependent sleep routine
RMAN-10023 RPC attempted to unrecognized package
RMAN-10024 error setting up for rpc polling
RMAN-10025 connection is already registered for events
RMAN-10026 network error number-number occurred registering connection
RMAN-10027 could not locate network layer context
RMAN-10028 network error number-number occurred during remote RPC
RMAN-10029 unexpected return code number from PL/SQL execution
RMAN-10030 RPC call appears to have failed to start on channel string
RMAN-10031 RPC Error: ORA-number occurred during call to string.string
RMAN-10032 unhandled exception during execution of job step number: string
RMAN-10033 error during compilation of job step number: string
RMAN-10034 unhandled exception during execution of job step number, error unknown
RMAN-10035 exception raised in RPC: string
RMAN-10036 RPC call OK on channel string
RMAN-10037 RPC anomaly detected on channel string, UPINBLT=number
RMAN-10038 database session for channel string terminated unexpectedly
RMAN-10039 error encountered while polling for RPC completion on channel string
RMAN-10040 asynchronous support not detected, RMAN will run synchronously
RMAN-10041 Could not re-create polling channel context following failure.
RMAN-11000 message number number not found in recovery manager message file
RMAN-11001 Oracle Error: string
RMAN-11002 could not open a cursor to the target database
RMAN-11003 failure during parse/execution of SQL statement: string
RMAN-11004 format requires %c when duplexing
RMAN-11005 conflicting media information for piece "string"
RMAN-11006 WARNING: test recovery results: string
RMAN-12000 execution layer initialization failed
RMAN-12001 could not open channel string
RMAN-12005 error during channel cleanup
RMAN-12007 cannot allocate more than number channels
RMAN-12008 could not locate backup piece string
RMAN-12009 command aborted because some backup pieces could not be located
RMAN-12010 automatic channel allocation initialization failed
RMAN-12011 multiple records for default device type found in repository
RMAN-12012 multiple records for string parallelism found in repository
RMAN-12013 multiple records for string channel number found in repository
RMAN-12014 multiple records for default channel configuration for string found in repository
RMAN-12015 configuration for string channel number is ignored
RMAN-12016 using channel string
RMAN-12017 could not locate pieces of backup set key string
RMAN-12018 channel string disabled, job failed on it will be run on another channel
RMAN-12019 continuing other job steps, job failed will not be re-run
RMAN-12020 error on step filtered for normal output string
RMAN-20000 abnormal termination of job step
RMAN-20001 target database not found in recovery catalog
RMAN-20002 target database already registered in recovery catalog
RMAN-20003 target database incarnation not found in recovery catalog
RMAN-20004 target database name does not match name in recovery catalog
RMAN-20005 target database name is ambiguous
RMAN-20006 target database name is missing
RMAN-20009 database incarnation already registered
RMAN-20010 database incarnation not found
RMAN-20011 target database incarnation is not current in recovery catalog
RMAN-20012 not authorized to register new database
RMAN-20013 error upgrading virtual private catalog
RMAN-20014 virtual private catalog owner must be granted RECOVERY_CATALOG_OWNER role
RMAN-20015 not authorized to share this catalog
RMAN-20016 virtual private catalog user cannot modify global scripts
RMAN-20017 illegal script update operation
RMAN-20018 database not found in recovery catalog
RMAN-20019 database name not unique in recovery catalog
RMAN-20022 user not found
RMAN-20029 cannot make a snapshot control file
RMAN-20030 resync in progress
RMAN-20031 resync not started
RMAN-20032 checkpoint CHANGE# too low
RMAN-20033 control file SEQUENCE# too low
RMAN-20034 resync not needed
RMAN-20038 must specify FORMAT for CONVERT command
RMAN-20039 format requires character when duplexing
RMAN-20045 must specify FORMAT for BACKUP INCREMENTAL FROM SCN command
RMAN-20079 full resync from primary database is not done
RMAN-20081 change stamp for the record
RMAN-20108 control file for remote database cannot be updated
RMAN-20109 remote database has different database ID
RMAN-20201 datafile not found in the recovery catalog
RMAN-20202 Tablespace not found in the recovery catalog
RMAN-20203 translation in progress
RMAN-20204 translation not started
RMAN-20205 incomplete UNTIL clause
RMAN-20206 log sequence not found in the repository
RMAN-20207 UNTIL TIME or RECOVERY WINDOW is before RESETLOGS time
RMAN-20208 UNTIL CHANGE is before RESETLOGS change
RMAN-20209 duplicate datafile name
RMAN-20211 FROM TIME is before RESETLOGS time
RMAN-20212 UNTIL CHANGE is an orphan incarnation
RMAN-20215 backup set not found
RMAN-20217 datafile not part of the database
RMAN-20218 datafile not found in repository
RMAN-20220 control file copy not found in the repository
RMAN-20221 ambiguous control file copy name
RMAN-20222 datafile name not found in recovery catalog or is ambiguous
RMAN-20223 DB_UNIQUE_NAME mismatch in snapshot control file
RMAN-20230 datafile copy not found in the repository
RMAN-20231 ambiguous datafile copy name
RMAN-20240 archived log not found in the repository
RMAN-20241 ambiguous archived log name
RMAN-20242 specification does not match any archived log in the repository
RMAN-20243 database db_unique_name is not known to the recovery catalog
RMAN-20244 can not change currently connected database db_unique_name
RMAN-20245 can not specify db_unique_name option in nocatalog mode
RMAN-20246 new db_unique_name is already known to the recovery catalog
RMAN-20247 specification does not match any foreign archived log in the repository
RMAN-20250 offline range not found in the repository
RMAN-20260 backup piece not found in the repository
RMAN-20261 ambiguous backup piece handle
RMAN-20272 no parent backup found for the incremental backup
RMAN-20280 too many device types
RMAN-20298 DBMS_RCVCAT package not compatible with the recovery catalog
RMAN-20299 DBMS_RCVMAN package not compatible with the recovery catalog
RMAN-20310 proxy copy not found in the repository
RMAN-20311 ambiguous proxy copy handle
RMAN-20401 script already exists
RMAN-20501 redo logs from parent database incarnation cannot be applied
RMAN-20502 DELETE EXPIRED cannot delete objects that exist - run CROSSCHECK
RMAN-20503 DELETE cannot delete expired objects - run CROSSCHECK or DELETE EXPIRED
RMAN-20504 corruption list not found in recovery catalog
RMAN-20505 create datafile during recovery
RMAN-20506 no backup of archived log found
RMAN-20507 some targets are remote - aborting restore
RMAN-20508 temporary resource already in use
RMAN-20509 temporary resource not found
RMAN-20510 database not found in source recovery catalog database
RMAN-20511 database name is ambiguous in source recovery catalog database
RMAN-20512 source database already registered in recovery catalog
RMAN-20514 feature requires Availability Machine recovery catalog
KFNDG-00200 invalid syntax
KFNDG-00201 invalid arguments
KFNDG-00202 invalid value (string) for parameter phase
KFNDG-00203 disk group name (string) exceeds maximum allowed length number
KFNDG-00204 disk group name string has invalid characters
KFNDG-00205 failed to interpret configuration file name
KFNDG-00301 new disk group (string) already exists, ignorning renamedg
KFNDG-00302 disk (string:string) does not contain a valid header
KFNDG-00303 failed to update disk group name for string
KFNDG-00304 unable to access heartbeat block of the device string:string
KFNDG-00305 failed to create configuration file
KFNDG-00306 unable to write to configuration file
KFNDG-00307 unable to read configuration file
KFNDG-00308 failed to process configuration file entry: string
KFNDG-00401 allocation unit size conflict (number, number)
KFNDG-00402 ASM metadata block size conflict (number, number)
KFNDG-00403 not all disks of disk group string were discovered
KFNDG-00404 disk group string contains offline disks, ignoring renamedg
KFNDG-00405 specified disk group string appears to be mounted
KFNDG-00406 disk group (string) is in use by CSS
KFNDG-00407 Could not find disks for disk group string
KFNDG-00408 disk (string:string) could not be discovered
KFNDG-00409 disk (string) doesn't belong to disk group (string)
KFNDG-00410 failed to discover devices in folder string
KFNDG-00600 internal error string
KFNDG-00601 fatal error string
KFNDG-00603 failed to initialize device discovery
KFNDG-00700 system dependent error (number, string, string, string) occurred
KFNDG-00701 Error number while performing I/O
KFED-00400 Operating system dependent operation: string failed with status: string
KFED-00401 Operating system failure message: string
KFED-00402 failure occurred at: string
KFED-00403 additional information: string
KFOD-00316 Error acquiring ASM disk discovery string from Grid Plug and Play profile: call to [string] failed.
KFOD-00400 OS system dependent operation: string failed with status: string
KFOD-00401 OS failure message: string
KFOD-00402 failure occurred at: string
KFOD-00403 additional information: string
LRM-00100 internal error [number]
LRM-00101 unknown parameter name 'string'
LRM-00102 'string' is not in the legal range for 'string'
LRM-00103 'string' contains an illegal integer radix for 'string'
LRM-00104 'string' is not a legal integer for 'string'
LRM-00105 'string' is not a legal Boolean for 'string'
LRM-00106 out of memory
LRM-00107 parameter name abbreviation 'string' is not unique
LRM-00108 invalid positional parameter value 'string'
LRM-00109 could not open parameter file 'string'
LRM-00110 syntax error at 'string'
LRM-00111 no closing quote for value 'string'
LRM-00112 multiple values not allowed for parameter 'string'
LRM-00113 error when processing file 'string'
LRM-00114 error when processing from command line
LRM-00115 error when processing an environment variable
LRM-00116 syntax error at 'string' following 'string'
LRM-00117 syntax error at 'string' at the start of input
LRM-00118 syntax error at 'string' at the end of input
LRM-00119 unable to obtain a valid value for 'string'
LRM-00120 'string' is not a legal Oracle number for 'string'
LRM-00121 'string' is not an allowable value for 'string'
LRM-00122 value 'string' for 'string' must be between 'number' and 'number'
LRM-00123 invalid character number found in the input file
LFI-00002 Out of memory. string
LFI-00003 Internal exception code. icode = [string], [string].
LFI-00004 Call to string failed.
LFI-00005 Free some memory failed in string.
LFI-00006 Invalid parameter to function string.
LFI-00007 NLSRTL's call failed. string.
LFI-00008 SLTS's initializing/terminating mutex failed for string.
LFI-00100 Unable to perform operation, file not opened in string.
LFI-00101 Write failed, file cannot be written to.
LFI-00102 Unable to seek in sequentially accessed file.
LFI-00103 Seek operation failed.
LFI-00104 Read operation failed.
LFI-00105 Unable to add path.
LFI-00106 Path object holds more than one path.
LFI-00107 Open does not expect the file [string][string] to exist.
LFI-00108 Open expect the file [string][string] to exist.
LFI-00109 Unable to open file [string][string]. string.
LFI-00110 Unable to initialize the Buffer Manager.
LFI-00111 No other flags allowed in fixed length format.
LFI-00113 Unable to initialize the Standard File object string.
LFI-00114 Append is not allowed with string.
LFI-00115 Buffer free failed.
LFI-00116 Unable to close file in operation string.
LFI-00117 Unable to rename file.
LFI-00118 Unable to change type to Unknown.
LFI-00119 Unable to Abort an Unprotected file.
LFI-00120 Unable to parse root filename string.
LFI-00121 Only one of REPLACE, or PROT allowed for opty.
LFI-00122 Can only delete a file if we create it.
LFI-00123 Cannot access file Sequentially and Randomly.
LFI-00124 No access mode was specified, default is sequential.
LFI-00125 Random access only allowed on fixed length record files.
LFI-00126 Record format can only be one of Fixed or Variable.
LFI-00127 No Record Format was specified, default is variable.
LFI-00128 Carriage Control is only valid for Standard file objects.
LFI-00129 Invalid option string were specified on an input only file.
LFI-00130 Input option specified on output only file.
LFI-00131 No open type specified.
LFI-00132 Record length string is greater than max length of string.
LFI-00133 Trying to create file string that already exists.
LFI-00134 Unable to protect a file for an append operation.
LFI-00135 Unable to remove temporary file.
LFI-00136 Unable to change type of open file.
LFI-00137 Unable to perform string on a file object that is string.
LFI-00138 Unable to perform string on a name object that is string.
LFI-00139 Option string cannot be used with option string in calling string.
LFI-00140 Invalid option string were specified on input-output file.
LFI-00141 Unable to abort file in operation string.
LFI-00142 Unable to delete an existing file [string][string] not owned by Oracle.
LFI-00143 Unable to delete non-existent file string.
LFI-00144 File [string][string] does not exist
LFI-00145 User buffer too short.
LFI-00146 copy does not expect the file string.string to exist
LFI-00147 File string.string does not exist
LFI-00148 string can be called only on files opened in byte mode
LFI-00149 Error on destroying hash table in function string
LFI-00150 Error on creating hash table in function string
LFI-00151 Error on inserting into hash table in function string
LFI-00152 Read operation (byte mode) failed.
LFI-01000 Unable to write line to file.
LFI-01001 Unable to write string bytes to file.
LFI-01002 Unable to read line from file.
LFI-01003 Unable to read string bytes from file.
LFI-01004 Unable to empty buffer.
LFI-01005 Unable to fill buffer.
LFI-01006 File ends in partial character in string.
LFI-01007 Line is too long; encountered in function string.
LFI-01500 Error condition on call to OSD function string.
LFI-01501 tmpnam() fails to generate temporary file name.
LFI-01502 Base filename does not exist.
LFI-01503 Max filename size exceeded generating filename.
LFI-01504 fseek() failed(OSD return value = string) in string.
LFI-01505 fclose() failed(OSD return value = string) in string.
LFI-01506 fflush() failed(OSD return value = string).
LFI-01507 fwrite() failed(OSD return value = string) in string.
LFI-01508 access() failed.
LFI-01509 fopen() failed(OSD return value = string).
LFI-01510 fread() failed(OSD return value = string) in string.
LFI-01511 unlink() failed(OSD errno = string) in string.
LFI-01512 stat() failed
LFI-01514 ftell() failed in string
LFI-01515 truncate() failed.
LFI-01516 read() failed (OSD return value = string) in string.
LFI-01517 open() failed(OSD return value = string).
LFI-01518 write() failed(OSD return value = string) in string.
LFI-01519 llseek() failed(OSD return value = string) in string.
LFI-01520 close() failed(OSD return value = string) in string.
LFI-01521 fsync() failed(OSD return value = string) in string.
LFI-01522 opendir() failed.
LFI-01523 rename() failed.
LFI-01524 fdopen() failed(OSD return value = string).
LFI-01525 setvbuf() failed.
PLS-00049 bad bind variable 'string'
PLS-00102 parser stack overflow because nesting is too deep
PLS-00103 string
PLS-00104 empty argument list in call of procedure 'string' must be omitted
PLS-00105 at most one forward declaration of type 'string' is permitted
PLS-00108 declarative units must be a single variable declaration
PLS-00109 unknown exception name 'string' in PRAGMA EXCEPTION_INIT
PLS-00110 bind variable 'string' not allowed in this context
PLS-00111 end-of-file in comment
PLS-00112 end-of-line in quoted identifier
PLS-00113 END identifier 'string' must match 'string' at line string, column string
PLS-00114 identifier 'string' too long
PLS-00115 this PRAGMA must follow the declaration of 'string'
PLS-00116 Duplicate where-clause in table expression
PLS-00117 Duplicate connect-by clause in table expression
PLS-00118 Duplicate group-by clause in table expression
PLS-00119 Duplicate having-clause in table expression
PLS-00120 inappropriate argument in OPEN statement
PLS-00122 string as separator is allowed only with specific built-in functions
PLS-00123 program too large (string)
PLS-00124 name of exception expected for first arg in exception_init pragma
PLS-00125 type name expected
PLS-00126 selector ALL is not allowed
PLS-00127 Pragma string is not a supported pragma
PLS-00128 Illegal number of arguments for pragma string
PLS-00129 Pragma INTERFACE only supports C as its first argument
PLS-00130 Pragma string expects 1st argument to be a procedure/function/package/cursor
PLS-00131 Pragma string expects 2nd argument to be a procedure/function
PLS-00132 Pragma string does not support string
PLS-00133 Pragma string expects 1st argument to be an identifier or string-literal
PLS-00134 Pragma string expects 2nd argument to be an identifier or string-literal
PLS-00135 Pragma string expects 3rd argument to be an identifier, string or numeric literal
PLS-00138 Precision for a binary type must be one of 8, 16, or 32
PLS-00139 duplicate external NAME specification in subprogram expression
PLS-00140 duplicate external LIBRARY specification in subprogram expression
PLS-00141 duplicate external PARAMETER STYLE specification in subprogram expression
PLS-00142 duplicate external PARAMETER list specification in subprogram expression
PLS-00143 duplicate external LANGUAGE specification in subprogram expression
PLS-00144 duplicate external CALLING STANDARD specification in subprogram expression
PLS-00145 duplicate external WITH CONTEXT specification in subprogram expression
PLS-00146 duplicate external TRUSTED/UNTRUSTED specification in subprogram expression
PLS-00147 LIBRARY or ASSEMBLY file specification string is empty
PLS-00148 Only 1 pragma of this type is allowed per subprogram
PLS-00150 found: string but expected : INTEGER
PLS-00151 Expression or Variable is an illegal type to PLS/QL: string
PLS-00152 POINTER type may only reference an object type.
PLS-00153 A string type may only be used as an object type attribute.
PLS-00154 An object type may have only 1 MAP or 1 ORDER method.
PLS-00155 Only a function may be a MAP, ORDER or CONSTRUCTOR method.
PLS-00156 Null constraints not supported for object attributes.
PLS-00157 AUTHID only allowed on schema-level programs
PLS-00160 AUTHID must specify CURRENT_USER or DEFINER
PLS-00161 Pragma string expects 3rd argument to be an identifier or a string literal
PLS-00162 Pragma string expects 4th argument to be a positive integer literal
PLS-00164 cursor subqueries are not supported in this release
PLS-00165 call statement is not supported in PL/SQL
PLS-00166 bad format for date, time, timestamp or interval literal
PLS-00167 keyword BULK is used in a wrong context
PLS-00168 duplicate modifier specification 'string'
PLS-00169 modifier 'string' conflicts with prior 'string' specification
PLS-00170 the SQL statement in an OPEN statement or FOR loop must be a SELECT
PLS-00171 duplicate dedicated AGENT specification in subprogram expression
PLS-00172 string literal too long
PLS-00173 SPACE, TAB or RETURN are disallowed as alternative quote delimiters
PLS-00174 a static boolean expression must be used
PLS-00176 unexpected preprocessor token '$string'
PLS-00177 '$string' preprocessor directive does not end properly
PLS-00178 a static character expression must be used
PLS-00179 $ERROR: string
PLS-00180 preprocessor directives are not supported in this context
PLS-00181 unsupported preprocessor directive 'string'
PLS-00182 Identifier cannot be an empty string
PLS-00201 identifier 'string' must be declared
PLS-00202 type 'string' must be declared
PLS-00203 function DECODE must be called with at least 3 non-boolean arguments
PLS-00204 function or pseudo-column 'string' may be used inside a SQL statement only
PLS-00205 Aggregate not allowed here
PLS-00206  %TYPE must be applied to a variable, column, field or attribute, not to "string"
PLS-00207 identifier 'string', applied to implicit cursor SQL, is not a legal cursor attribute
PLS-00208 identifier 'string' is not a legal cursor attribute
PLS-00209 table 'string' is not in FROM clause
PLS-00210 an OTHERS clause is required in this CASE statement
PLS-00211 CASE labels or ranges must not be duplicated in different WHEN clauses
PLS-00212 could not obtain enough memory to compile CASE statement
PLS-00213 package STANDARD not accessible
PLS-00214 BEGIN...END block nesting is too deep
PLS-00215 String length constraints must be in range (1 .. 32767)
PLS-00216 NUMBER precision constraint must be in range (1 .. 38)
PLS-00217 NUMBER scale constraint must be in range (-84 .. 127)
PLS-00218 a variable declared NOT NULL must have an initialization assignment
PLS-00219 label 'string' reference is out of scope
PLS-00220 simple name required in this context
PLS-00221 'string' is not a procedure or is undefined
PLS-00222 no function with name 'string' exists in this scope
PLS-00223 paramaterless procedure 'string' used as function
PLS-00224 object 'string' must be of type function or array to be used this way
PLS-00225 subprogram or cursor 'string' reference is out of scope
PLS-00226 package 'string' used as variable reference
PLS-00227 subprogram 'in' formal string is not yet denotable
PLS-00228 Illegal declaration of variable of type LONG
PLS-00229 Attribute expression within SQL expression
PLS-00230 OUT and IN OUT formal parameters may not have default expressions
PLS-00231 function 'string' may not be used in SQL
PLS-00232 nested packages not permitted
PLS-00233 function name used as an exception name in when clause
PLS-00234 PARAMETER STYLE SQL may not be specified with a PARAMATERS list
PLS-00235 the external type is not appropriate for the parameter
PLS-00236 Invalid external type specification for string.
PLS-00237 invalid BY VALUE indicator or length specification
PLS-00238 external parameter name string not found in formal parameter list
PLS-00239 invalid external type specification for SQLCODE
PLS-00240 Invalid type specification for RETURN indicator, length, tdo, duration
PLS-00241 invalid external type specification for SQLSTATE
PLS-00242 invalid external type specification for CONTEXT
PLS-00243 invalid external type specification for SQLNAME
PLS-00244 Multiple declarations in foreign function formal parameter list
PLS-00245 Formals used in the 'parameters' clause must appear exactly once
PLS-00246 PARAMETER STYLE is unsupported
PLS-00247 LIBRARY or ASSEMBLY name must be specified
PLS-00248 Invalid Library Syntax
PLS-00249 Invalid WITH CONTEXT Syntax
PLS-00250 Incorrect Usage of string in parameters clause.
PLS-00251 RETURN, for actual function return, must be last in the parameters clause
PLS-00252 reference to the wrong copy of package STANDARD
PLS-00253 Formal parameter string missing in the parameters clause
PLS-00254 OUT and IN/OUT modes cannot be used in this context
PLS-00255 CALL Specification parameters cannot have default values
PLS-00256 string is not a valid external library or assembly
PLS-00257 illegal use of EXTERNAL clause in a TYPE or PACKAGE specification
PLS-00258 constrained datatypes disallowed in CALL Specifications
PLS-00259 rights model (AUTHID) must be specified
PLS-00260 Datetime/Interval constraints must be in range (0 .. 9)
PLS-00261 Java CALL Specification not yet allowed as a method in an object type
PLS-00301 Invalid GOTO to non-label 'string'
PLS-00302 component 'string' must be declared
PLS-00303 qualifier 'string' must be declared
PLS-00304 cannot compile body of 'string' without its specification
PLS-00305 previous use of 'string' (at line string) conflicts with this use
PLS-00306 wrong number or types of arguments in call to 'string'
PLS-00307 too many declarations of 'string' match this call
PLS-00308 this construct is not allowed as the origin of an assignment
PLS-00309 with %LAST attribute, 'string' must be a variable of an enumerated type
PLS-00310 with %ROWTYPE attribute, 'string' must name a table, cursor or cursor-variable
PLS-00311 the declaration of "string" is incomplete or malformed
PLS-00312 a positional parameter association may not follow a named association
PLS-00313 'string' not declared in this scope
PLS-00314 TABLE declarations are not allowed as PL/SQL local variables
PLS-00315 Implementation restriction: unsupported table index type
PLS-00316 PL/SQL TABLEs must use a single index
PLS-00317 incomplete type "string" was not completed in its declarative region
PLS-00318 type "string" is malformed because it is a non-REF mutually recursive type
PLS-00319 subquery in an IN or NOT IN clause must contain exactly one column
PLS-00320 the declaration of the type of this expression is incomplete or malformed
PLS-00321 expression 'string' is inappropriate as the left hand side of an assignment statement
PLS-00322 declaration of a constant 'string' must contain an initialization assignment
PLS-00323 subprogram or cursor 'string' is declared in a package specification and must be defined in the package body
PLS-00324 cursor attribute may not be applied to non-cursor 'string'
PLS-00325 non-integral numeric literal string is inappropriate in this context
PLS-00326 IN clause must contain same number of expressions as subquery
PLS-00327 "string" is not in SQL scope here
PLS-00328 A subprogram body must be defined for the forward declaration of string.
PLS-00329 schema-level type has illegal reference to string
PLS-00330 invalid use of type name or subtype name
PLS-00331 illegal reference to string
PLS-00332 "string" is not a valid prefix for a qualified name
PLS-00333 "string" must match an object-table alias in this context
PLS-00334 "string" matches table or view without an alias
PLS-00335 a package name conflicts with an existing object
PLS-00336 non-object-table "string" illegal in this context
PLS-00337 "string" matches too many object table aliases
PLS-00338 unable to resolve "string" as a column or row expression
PLS-00339 "string" matches object-table without a REF or VALUE modifier
PLS-00341 declaration of cursor 'string' is incomplete or malformed
PLS-00351 Not logged onto database 'string'
PLS-00352 Unable to access another database 'string'
PLS-00353 'string' must name a user in the database
PLS-00354 username must be a simple identifier
PLS-00355 use of pl/sql table not allowed in this context
PLS-00356 'string' must name a table to which the user has access
PLS-00357 Table,View Or Sequence reference 'string' not allowed in this context
PLS-00358 column 'string' exists in more than one table; use qualifier
PLS-00359 assignment target in 'string' must have components
PLS-00360 cursor declaration without body needs return type
PLS-00361 IN cursor 'string' cannot be OPEN'ed
PLS-00362 invalid cursor return type; 'string' must be a record type
PLS-00363 expression 'string' cannot be used as an assignment target
PLS-00364 loop index variable 'string' use is invalid
PLS-00366 subtype of a NOT NULL type must also be NOT NULL
PLS-00367 a RAISE statement with no exception name must be inside an exception handler
PLS-00368 in RAISE statement, 'string' must be an exception name
PLS-00369 no choices may appear with choice OTHERS in an exception handler
PLS-00370 OTHERS handler must be last among the exception handlers of a block
PLS-00371 at most one declaration for 'string' is permitted
PLS-00372 In a procedure, RETURN statement cannot contain an expression
PLS-00373 EXIT/CONTINUE label 'string' must label a LOOP statement
PLS-00374 illegal EXIT/CONTINUE statement; must appear inside the loop labeled 'string'
PLS-00375 illegal GOTO statement; this GOTO cannot branch to label 'string'
PLS-00376 illegal EXIT/CONTINUE statement; it must appear inside a loop
PLS-00377 internal type PLS_INTEGER is not included in this release of PL/SQL
PLS-00378 invalid compilation unit for this release of PL/SQL
PLS-00379 CASE statements are not included in this release of PL/SQL
PLS-00380 functions and procedures are not included in this release of PL/SQL
PLS-00381 type mismatch found at 'string' between column and variable in subquery or INSERT
PLS-00382 expression is of wrong type
PLS-00383 type mismatch found at 'string' inside an IN or NOT IN clause
PLS-00384 type mismatch found at 'string' in UPDATE's SET clause
PLS-00385 type mismatch found at 'string' in SELECT...INTO statement
PLS-00386 type mismatch found at 'string' between FETCH cursor and INTO variables
PLS-00387 INTO variable cannot be a database object
PLS-00388 undefined column 'string' in subquery
PLS-00389 table, view or alias name "string" not allowed in this context
PLS-00390 undefined column 'string' in INSERT statement
PLS-00391 undefined column 'string' in UPDATE statement
PLS-00392 Type mismatch in arguments to BETWEEN
PLS-00393 wrong number of columns in SELECT...INTO statement
PLS-00394 wrong number of values in the INTO list of a FETCH statement
PLS-00395 wrong number of values in VALUES clause of INSERT statement
PLS-00396 INSERT statement's subquery yields wrong number of columns
PLS-00397 Type mismatch in arguments to IN
PLS-00398 wrong number of columns in UNION, INTERSECT, or MINUS expression
PLS-00399 different types of columns in UNION, INTERSECT, or MINUS expression
PLS-00400 different number of columns between cursor SELECT statement and return value
PLS-00401 different column types between cursor SELECT statement and return value found at 'string'
PLS-00402 alias required in SELECT list of cursor to avoid duplicate column names
PLS-00403 expression 'string' cannot be used as an INTO-target of a SELECT/FETCH statement
PLS-00404 cursor 'string' must be declared with FOR UPDATE to use with CURRENT OF
PLS-00405 subquery not allowed in this context
PLS-00406 length of SELECT list in subquery must match number of assignment targets
PLS-00407 '*' not allowed here; a list of columns is required
PLS-00408 duplicate column 'string' not permitted in INSERT or UPDATE
PLS-00409 duplicate variable 'string' in INTO list is not permitted
PLS-00410 duplicate fields in RECORD,TABLE or argument list are not permitted
PLS-00411 Number of values in aggregate and in subquery don't match
PLS-00412 list of values not allowed as argument to this function or procedure
PLS-00413 identifier in CURRENT OF clause is not a cursor name
PLS-00414 no column 'string' in table
PLS-00415 'string' is an OUT parameter and cannot appear in a function
PLS-00416 The third argument of DECODE cannot be NULL
PLS-00417 unable to resolve "string" as a column
PLS-00418 array bind type must match PL/SQL table row type
PLS-00419 reference to remote attribute not permitted
PLS-00420 can't call builtin routines remotely
PLS-00421 circular synonym 'string'
PLS-00422 no PL/SQL translation for the bindtype given for this bind variable
PLS-00423 ORDER BY item must be the number of a SELECT-list expression
PLS-00424 RPC defaults cannot include Package State
PLS-00425 in SQL, function argument and return types must be SQL type
PLS-00427 RPC defaults cannot use builtins when versions of STANDARD differ
PLS-00428 an INTO clause is expected in this SELECT statement
PLS-00429 unsupported feature with RETURNING clause
PLS-00430 FORALL iteration variable string is not allowed in this context
PLS-00431 bulk SQL attributes must use a single index
PLS-00432 implementation restriction: cannot use FORALL and BULK COLLECT INTO together in SELECT statements
PLS-00433 inconsistent package STANDARD
PLS-00434 record field has unsupported type: "string"
PLS-00435 DML statement without BULK In-BIND cannot be used inside FORALL
PLS-00436 implementation restriction: cannot reference fields of BULK In-BIND table of records or objects
PLS-00437 FORALL bulk index cannot be used in string clause
PLS-00438 value in LIMIT clause: 'string' use is invalid
PLS-00439 A LIMIT clause must be used within a BULK FETCH
PLS-00440 FORALL bulk IN-bind variables cannot be used here
PLS-00441 EXIT/CONTINUE statement may have a label here; 'string' is not a label
PLS-00442 CONTINUE statement may not have the prefix STANDARD
PLS-00450 a variable of this private type cannot be declared here
PLS-00452 Subprogram 'string' violates its associated pragma
PLS-00453 remote operations not permitted on object tables or user-defined type columns
PLS-00454 with a returning into clause, the table expression cannot be remote or a subquery
PLS-00455 cursor 'string' cannot be used in dynamic SQL OPEN statement
PLS-00456 item 'string' is not a cursor
PLS-00457 expressions have to be of SQL types
PLS-00458 subprogram 'string' cannot be called from a REPEATABLE subprogram
PLS-00459 this feature is not allowed in REPEATABLE subprogram
PLS-00460 REPEATABLE subprogram 'string' has to be RNDS, WNDS, RNPS, and WNPS
PLS-00461 mismatch REPEATABLE information between specification and body of 'string'
PLS-00462 nested subprogram 'string' has to be REPEATABLE
PLS-00483 exception 'string' may appear in at most one exception handler in this block
PLS-00484 redundant exceptions 'string' and 'string' must appear in same exception handler
PLS-00485 in exception handler, 'string' must be an exception name
PLS-00486 select list cannot be enclosed in parentheses
PLS-00487 Invalid reference to variable 'string'
PLS-00488 'string' must be a type
PLS-00489 invalid table reference: 'string' must be a column in this expression
PLS-00490 illegal statement
PLS-00491 numeric literal required
PLS-00492 variable or constant initialization may not refer to functions declared in the same package
PLS-00493 invalid reference to a server-side object or function in a local context
PLS-00494 coercion into multiple record targets not supported
PLS-00495 too many columns in SELECT...INTO statement after bursting record targets
PLS-00496 too few columns in SELECT...INTO statement after bursting record targets
PLS-00497 cannot mix between single row and multi-row (BULK) in INTO list
PLS-00498 illegal use of a type before its declaration
PLS-00499 coercion into collection of records not supported
PLS-00500 invalid operator binding
PLS-00503 RETURN <value> statement required for this return from function
PLS-00504 type string_BASE may not be used outside of package STANDARD
PLS-00505 User Defined Types may only be defined as PLSQL Tables or Records
PLS-00506 User Defined Constrained Subtypes are disallowed
PLS-00507 a PLSQL Table may not contain a table or a record with composite fields
PLS-00508 The expression in a RETURN statement cannot be a type
PLS-00509 Implementation Restriction : Pass a returned record to a temporary identifier before selecting a field
PLS-00510 Float cannot have scale
PLS-00511 a record may not contain a PL/SQL table of records
PLS-00512 Implementation Restriction: 'string': Cannot directly access remote package variable or cursor
PLS-00513 PL/SQL function called from SQL must return value of legal SQL type
PLS-00514 INSERT statement with REF INTO clause requires a typed table
PLS-00515 The type of the REF INTO variable 'string' must be REF to the table's type
PLS-00516 Type mismatch between object table and value 'string' in INSERT statement.
PLS-00517 Type mismatch between a select list element 'string' and corresponding table column in INSERT statement with a subquery
PLS-00518 This INSERT statement requires VALUES clause containing a parenthesised list of values
PLS-00519 This INSERT statement requires a VALUES clause containing an object type expression, not a list of values
PLS-00520 MAP methods must be declared without any parameters other than (optional) SELF.
PLS-00521 ORDER methods must be declared with 1 (one) parameter in addition to (optional) SELF.
PLS-00522 MAP methods must return a scalar type.
PLS-00523 ORDER methods must return an INTEGER.
PLS-00524 The parameter type in an ORDER method must be the containing object type.
PLS-00525 Within SQL statements, only equality comparisons of objects are allowed without a map or order function.
PLS-00526 A MAP or ORDER function is required for comparing objects in PL/SQL.
PLS-00527 MAP or ORDER functions require a PRAGMA RESTRICT_REFERENCES specifying :WNDS,WNPS,RNPS,RNDS.
PLS-00528 The parameters to an ORDER function must have IN mode
PLS-00529 Bad column name string in INSERT statement (must be an identifier)
PLS-00530 Illegal type used for object type attribute: 'string'.
PLS-00531 Unsupported type in a VARRAY or TABLE type: 'string'.
PLS-00532 Target of REF must be a complete or incomplete object type.
PLS-00533 Tables of non_queryable types are not supported.
PLS-00534 A Table type may not contain a nested table type or VARRAY.
PLS-00535 A VARRAY type may not contain a NESTED TABLE, VARRAY or LOB
PLS-00536 Navigation through REF variables is not supported in PL/SQL.
PLS-00537 A VARRAY must have a positive limit
PLS-00538 subprogram or cursor 'string' is declared in an object type specification and must be defined in the object type body
PLS-00539 subprogram 'string' is declared in an object type body and must be defined in the object type specification
PLS-00540 object not supported in this context.
PLS-00541 size or length specified is too large.
PLS-00542 CLOB and NCLOB cannot use varying-width character sets in the server
PLS-00543 a PLSQL Table may not contain a nested table type or VARRAY.
PLS-00546 SELF may not be declared as a REF parameter.
PLS-00548 invalid use of operator.
PLS-00550 character set specification is not allowed for this type
PLS-00551 character set ANY_CS is only allowed on a subprogram parameter
PLS-00552 flexible character set is not allowed on component element
PLS-00553 character set name is not recognized
PLS-00554 character set has already been determined
PLS-00555 default expressions are not allowed for SQL operators
PLS-00560 character set mismatch
PLS-00561 character set mismatch on value for parameter 'string'
PLS-00562 a function must return a type.
PLS-00563 illegal use of CAST expression
PLS-00564 lob arguments are not permitted in calls to remote server
PLS-00565 string must be completed as a potential REF target (object type)
PLS-00566 type name "string" cannot be constrained
PLS-00567 cannot pass NULL to a NOT NULL constrained formal parameter
PLS-00568 cannot access rows from a non-nested table item
PLS-00569 numeric overflow or underflow
PLS-00570 different number of columns in the multiset and cast expressions
PLS-00571 method access through data base link not yet supported on client side
PLS-00572 improper constraint form used
PLS-00573 cannot constrain scale, precision, or range of an anchored type declaration
PLS-00580 supertype must be an object type
PLS-00581 inheritance is not supported for opaque types
PLS-00582 attribute declarations are not allowed in opaque types
PLS-00583 size must be specified if opaque type is fixed-length
PLS-00584 size of an opaque type must be between 1 and 4000 bytes
PLS-00585 declared support library for opaque type is not a library
PLS-00586 a static method cannot declare a parameter named SELF
PLS-00587 a static method cannot be invoked on an instance value
PLS-00588 unqualified instance attribute references allowed only in member methods
PLS-00589 no attributes found in object type "string"
PLS-00590 attempting to create a subtype UNDER a FINAL type
PLS-00591 this feature is not supported in client-side programs
PLS-00592 the type of a object table must be an object type
Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox